A homemade fish trap, the article briefly talks about how to make a fishing “muzzle” out of pasture material. You will definitely catch it in your ear.

There is such a category of people who are ready to live in the natural environment while having a minimum of means for survival. There is some kind of extreme in this. And until you try this lifestyle yourself (or games, whichever is more convenient for you), you won’t understand all the charm of this lifestyle until then. For example, our team has the most different people: from very young (18-19 years old) to adults under 60 years old, who occupy almost all social niches in "urban" life (students, managers, directors, etc.). But we were united by the fact that several times a year we get together, plan a common route for several days, and hit the road. The main rule that everyone in our group follows is that we get food ourselves. We take almost nothing with us, only the most necessary, as situations are different. So, the ability to get food in a forest or on a pond is the key to survival in a difficult situation. Many people who in ordinary life did not believe in themselves, after such trips, gain some confidence in their abilities, which as a result affects their later life.

There are many ways to get food in nature. I will try to tell a simple method of extraction (capture), provided that you only have a great desire to stay with food, a desire to live, and trees growing nearby (ideally, spruce, pine, etc.). If there are trees nearby, you can build several devices with which you can actually catch fish. I'll tell you only about one thing - about the face. The snout is a fishing trap that is loosely a cylindrical lattice structure with the neck pointing inward. The neck gradually narrows towards the base, not reaching the last by 20-30 centimeters. The fish swims into the neck, gradually moves towards the bottom of the structure, passes through the narrow part, and is no longer able to get back. A person can only pull his muzzle out of the water and collect the catch. Under normal circumstances, the bottom of the muzzle opens up to make it easier to reach the fish, but we will make the muzzle a more primitive type.

Making a homemade fish trap

So, the first step is to cut down a few young branches that bend well and twist them into a circle. The ends can be tied with thinner branches and pinched into a split. Then, from thinner branches, freeing them from needles or leaves, you need to connect the finished circles to each other so that the distance between them is about 30-40 cm. To give density to the structure, you can use several thick branches, which are fixed with thin ones along the round branches . The result should be a kind of mesh cylinder, the bottom of which is also covered with thin branches.

Now let's make the neck. To do this, you need to stick several dense sticks into the ground so that they form a kind of circle with a diameter of about 10 cm near the ground, and their top forms a circle comparable to the diameter of our cylinder. After that, you need to tie sticks with thin branches to get a mesh structure. Special care is not required here, the main thing is that the design has some strength. When the neck is ready, it is tied with thin branches to the upper part of the cylinder, not forgetting to secure and lower part neck beyond the middle circles of the cylinder. Everything, a homemade fish trap for fishing is ready. Ideally, the muzzle is tied with a rope and thrown into the water. But, you can do without a rope, just in this case you will have to climb into the water behind the muzzle to get it. Sometimes, in order to get the structure out of the water, we also use a pole, it all depends on the situation. Practice shows that such a home-made fish trap catches quite well, it is enough for it to stay in the water for about 3-10 hours. For those who are fond of the topic of survival, this skill will be interesting and useful, the trap making schemes are just below.

All the best to you.

A completely non-standard way for us fishing mastered by the Vietnamese. Of course, these Asians can fish with nets, hooks and rods, however, in this particular case, they fish with plastic bottles. The adaptation of a simple design and the method of catching are waiting for you further.

Passing over the bridge immediately and do not pay attention. on what kind of revival level is lower.

They catch fish. A common thing In India, too, from bridges they catch on a fishing line tied to a finger. At first I thought that the same construction is used here.

I approached the guys at the bridge and found that they catch fish in a completely non-standard way in my understanding. At the end of the fishing line there is a cut off soda bottle, and the bottom is cut off.

At the bottom of the cork there is a sinker, and they pour flour into the bottle itself and mix thoroughly.

Then they throw it down. Judging by the fact that the guys are wearing helmets, they came quickly to catch fish without even taking off their helmets.

They throw the fishing line, the bottle lies sideways on the bottom, wait a few seconds and hook it. The catch in the bottle is a palm-length fish.

Catch by one of the bottle fishermen.

An excellent and non-standard version of the top, muzzle, netting (as soon as they are not called) is a do-it-yourself fish trap.

It seems to be the simplest, but with some changes from those made from plastic bottles.

You will always catch live bait with such a home-made fishing device.

Self-made trap-muzzle from PVC bottles for catching fish (live bait)

You will need a couple of plastic bottles with a volume of 5 liters. In these, water is also sold in the store.

At the first bottle, cut off 1/4 of the distance from the neck. It turns out 2 parts. At the short part, we cut off the neck completely (so the live bait will pass larger).

At the second bottle, we cut off the bottom completely, leave the neck with the lid - we get a through plastic tunnel with a lid.

Now let's connect the long part of the first one to the tunnel. We make a circle where the bottles are connected by holes with a soldering iron. And then we tie-stitch with fishing line.

We turn the short part of the first bottle down with a bottleneck and insert it into our resulting design.

With a soldering iron, we make holes in the connection of the funnel and the tunnel next to each other and tighten with fishing line.

We repeat (making holes and pulling the fishing line together) from all four sides.

We make many holes throughout the form so that the water passes and tie a good handle to the beginning of the funnel.

Here you have a homemade fish trap with your own hands from improvised means.

Video below to make it clearer.

Homemade fish trap from PVC bottles - Video

A fish trap on a river is necessary if you want to catch a whole and unharmed fish. If fishing is a pleasure for you, you need a fish to release it, if you are catching fish for further resale in a live form, you do not want to injure it, then you need to use simple, effective and easy-to-use traps. They can be created from various materials.

How to make a fish trap from a plastic bottle?

Manufacturing plastic traps are in demand because this homemade model variant can be created anywhere. We take clean water in plastic bottles, they can be found in nature, purchased at the nearest store, borrowed from people resting nearby.

The plastic bottle fish trap is different in size. If you are planning a small catch, then take a base of 1.5-2 liters. If large production is expected, then 5-liter models will suit you.

1. Bottle washing. First plastic attribute is thoroughly washed. It is important that there are no foreign odors on it. Remove existing stickers. If a design prepared from a bottle of vegetable oil, then it can not be washed. This smell attracts fish.
2. Remove 1/3 of the piece. Remove part of the bottle from the side of the neck. The area of ​​the structure to be eliminated depends on the volume of the future catch. As a rule, cut off 1/3 of the part, turn it over, insert the neck into the bottle.
3. Fixation. Homemade the model needs to be fixed starting position. For this, wire is used. It is desirable to create from 2 to 4 fixation points. It must be borne in mind that this neck will then have to be removed. Therefore, do not overdo it.
4. Small holes. Fish traps on the river should have relatively small holes. Then the bottle can quickly sink to the required depth.
5. Bait room. In the created tackle a small amount of bait is placed. This speeds up the fishing process.
6. Adding cargo. It is best to put it inside the bottle. Such a load allows you to avoid hooks during the dive and the fishing process.

Everything, your fishing attribute is ready to be applied. Ways its uses are different. You can throw the model against the current, fix it with a rope on the shore. Can be dropped into standing water in any position.

How to make a fish trap from the network?

The fish won't stand a chance survival e, if you create a trap from the network. It needs a frame. You can create it from any solid improvised materials. It can be plastic, aluminum rods, corners, etc.

1. Stretching the mesh. A do-it-yourself fish trap is created from a grid in which the cells do not exceed 1 cm.
2. Funnel formation. It is necessary to create funnels from the same mesh as the fitting of the form.
3. We insert the narrow part of the funnel into the grid located on the frame. This must be done from two opposite sides.
4. Bait. When a fish trap is created, there should be no questions about how to use it. It is important to place the bait inside and lower the model into the water.
5. We lower the model into the water. If the frame of the trap is metal, then the immersion process should be very fast. With a wooden frame, it is recommended to place additional weight on or in the trap.

Types of fish traps

There are a large number of different traps that you can purchase from specialized stores or make your own. Consider briefly the most popular.

• Stationary traps. They are made once and serve for many years. They are not lowered into the water - they are constantly in it.

• Tunnel traps. It's a deadly fish maze. After the prey swims inside, it gets confused in the maze, does not find a way out of it.

• Trap "spider". It consists of a screen and several arcs connected to each other at the top point.

Going for fish on a natural reservoir, do not forget about waterproof backpacks for fishing. In them you can save the bait. Even if there is a heavy downpour, all things that are will be safe and sound. You can always change into dry clothes, maintain your health and enjoy the exciting process of fishing.

A waterproof bag is the main assistant for any fisherman. If comfort and coziness are important to you, if you want to feel free at any body of water, then take care of accessories in advance that will turn the usual process of fishing into an exciting hobby that you cannot refuse.

Try making your own fish trap first in a familiar home environment. Here you have at your fingertips all the necessary items, improvised materials. Choose a trap that you would like to use in nature. After the skills are brought to automatism, you can try to make a trap near the reservoir, just before you start catching fish.

In every house you can find a plastic bottle. For some, this is nothing more than garbage, but for others, a useful item. Everyone can find a special use for it. For children, various fakes are made from them: bird feeders, and flower stands. A lot of useful little things can be made from a plastic bottle, it just takes a little time, patience and creativity.

Even anglers have found a use for it. Some designs that have been tested in practice are willingly shared in this article.

Plastic bottle for fishing

For catching fish, a huge number of special devices are required, which, by the way, are quite expensive. Therefore, a 1.5 - 2 liter bottle will help to significantly save.

Bottle - anchor

If fishing is planned on a boat, then you will definitely need an anchor, and sometimes two, to fix the boat motionless. In such cases, one anchor is installed on the bow of the boat and, accordingly, the second is installed on the opposite one. If there is a snag with the anchors, then a plastic bottle will come to the rescue. From it in a few minutes you can make a fake that will perform the function of an anchor.

To do this: we make two holes in the lid, thread a thick rope or thick wire, make a loop, fasten it with a knot from the outside. We fill the bottle with sand, small pebbles, you can add water. Screw the cap onto the bottle. We tie a rope of the desired length to the loop. ready.

Tackle - trap

The next invention is a fish trap. Fishermen have been using this kind of tackle since ancient times. You can lure small fish into such a device, which will come in handy when catching larger individuals “on live bait”. It is easy to make: cut off the neck for about 1 of the entire length of the bottle, get a funnel, turn it over and install it in the body so that the neck coincides with the middle of the bottom of the bottle. We tightly connect the resulting parts. To do this, you can use a soldering iron, or if you are already in nature, carefully walk along the edge with a hot coal.

Along the entire length of the bottle, you need to pierce small holes for a stack of water. We make 2 holes along the edges for fixing the handle, it can be made from any rope at hand. We pass it through the holes and fix it with knots. Inside we place some sand for cargo and bait. Having spotted a treat, the fry will penetrate inside through the neck.

Plastic bottle feeder for fishing

Not an intricate exhibit for fishing, but very necessary - this is a feeder. There are several ways to make it from a plastic bottle.

First: "Lid - feeder." You will need a cover, a lead washer - for a sinker, a carabiner, several hooks and a fishing line. We make a hole in the center of the lid and thread the fishing line, tightening the loop on both sides, put a sinker on the outer one, and hooks on the inner one. We fix the weight on the bottom of the lid. This device will serve as a weighting agent and a feeder at the same time. On the inner part we lay out the bait, under which the hooks are hidden. We throw and wait for a bite. Such a feeder will be useful when catching bream, carp, roach. For bait, corn, dough, pasta or maggots are perfect.

The second manufacturing method is as follows: cut off the bottom and neck from the bottle. We cut the resulting cylinder across, mark the location of the feeders with a marker. Cut out the holes according to the marks. We fold the cylinder, fix the edges, for this you can use a soldering iron. According to the dimensions of the resulting structure, we bend the lead plate at the bend, tighten the fastener. The feeder is ready.