During winter fishing, the angler needs to protect himself from many weather conditions that are acceptable in winter and for this, it is very suitable.

In addition, it increases the time the fisherman stays in cold weather. If heating devices are used in the tent, then the air in it can be warmed up to 20 degrees and is freely in it without outerwear.

Types of winter fishing tents

Winter tents are divided into types, on which their design, installation and assembly depend.

• Umbrella. This type is considered the simplest in its design. It has an umbrella design, thanks to which it is easy to mount and assemble. For the manufacture of the frame, dural rods are used, which increase the reliability and strength of the tent. The awning can be made of synthetic fabrics or a combination with a tarpaulin.
• Machine. The scheme of their construction is that a tent is sewn to the frame. When collecting, it is enough to twist it into a circle, and it unfolds instantly due to the action of the frame, which works like a spring. Such tents are becoming more and more popular among anglers, because they have a low price, low weight. But along with this, it has many disadvantages: poor wind resistance, the frame breaks easily if the tent is not properly aligned.
• Frame. Its design resembles the usual summer version. It develops from several folding arches and an awning. She understands for 10 minutes, or even more. The tent does not differ in special reliability. Fishermen rarely purchase this type of winter tent.

What requirements should a homemade tent for winter fishing meet?

Should create the most favorable conditions on cold, windy, winter days. In addition, it should serve as a place where you can cook food, drink hot tea and just keep warm.

Now the market is full of all possible types of tents, but it's still nice to make your own. If you perform self-tailoring of a tent, you should complete it with some requirements:

• It should be light and compact.
• Since it is portable, the tent must be mobile.
• Select fabrics should be dense.
• It should be easy and quick to assemble and disassemble.
• In its manufacture, it is better to give preference to stronger and more reliable materials. The heat in the middle of the structure should be maintained as long as possible.

What materials and tools will you need?

A very common, home-made is a design based on. You can buy it at any store that specializes in selling fishing tackle. In addition, you will also need some accessories:

• Skis, in the amount of two pairs (children's and school version)
• Tubes, you can use ski poles.
• Old folding bed.
• Thick fabric, tarpaulin works best.

At first glance, it is not entirely clear what this design will look like. But, in practice, its effectiveness and ease of use have been proven. After the design is completed, a box should be obtained, which is transported using skis. In addition, it is easy to assemble and move even on ice.

Drawings of a homemade winter tent

As can be seen from the diagram, the tent is mounted on skis and this simplifies its fastening on the ice. Indeed, fastening ordinary winter tents requires a lot of time and effort. And with a similar design, the angler can move around the pond many times. Wherever a new hole is made, the angler pulls it up to him and, climbing inside, is ready to fish in warmth and comfort.

Note! To reduce the windage, and in strong winds it was easier to drag the tent, it is necessary to remove the awning from the tent. If this is not done, then it will simply be difficult to drag it.

Step-by-step instruction

This design is very old, but very reliable. More than one generation of anglers have experienced it in practice.

How to make a tent with your own hands photo and pattern

• Ski poles will serve as a frame, where they are mounted vertically. Horizontal tubes should be an order of magnitude thinner. The upper nodes must be made in the form of a triple connecting adapter and its termination is made as a cylinder. It is worth noting that the diameters of the cylinder and the tubes with which they are connected must match.
• Next is the fixing of the tubes in vertical position to skis. A T-shaped tongue is inserted into the metal plate fixed on the ski, which is located at the lower end of the tube. After that, the tube is rotated 90 degrees.
• Two pipes taken from a cot used to connect the frame to the box. At the end of the bent tube, the end of the docking product is fixed. The latch is installed on the other end of the tube.
• Eyelets made from copper strip will serve to connect the box with the tubes.
• At the end of all the work, it remains to pull the awning. In its lower part, metal plates with slots are installed. In these slots it is necessary to stretch the brackets that are driven into the side ends of the skis. Connections are fixed with laces. In order for the structure to stably hold on to a frozen reservoir, it must be equipped with two anchors.

Homemade pegs and tent pins

In order to make pegs that will be used for a winter tent, you need to take long and strong self-tapping screws. At the peg, the top is made in the form of a hook. This process is done with pliers. Screws are made from metal tubes that have a thread. If there is none, then self-tapping screws will fit perfectly.

How to sew a tent with your own hands in the form of a house

You can consider another very popular type of tents, which are made in the form of a house. For self-manufacturing such a tent will need:

• Fabric that does not get wet - 14 sq.m.
• Metal washers - 1.5 mm diameter (up to 20 pcs.)
• Braided rope - 15 meters.
• Not a wide tape - 9 meters.
• Rubberized fabric for bedding - 6 meters.

Having prepared all the materials, you can proceed to the manufacture of a tent that can accommodate one or two people. To begin with, 2 pieces of fabric of the same size are cut out - 1.8 by 0.9 meters. On the long side, markings of 65 centimeters are made, the same operation is done on the other side. The fabric is cut at the connection points. Thus, the entrance and the back wall of the tent are obtained.

The diagram shows how to do all the other work step by step. The only thing to remember is that all elements are stitched together with high quality. This is where tape comes to the rescue, which will strengthen the seams.

For those anglers who want to fish not only during the daytime, but also all night long, the issue of heating a winter tent is quite acute. No matter how good a tent is, when it's -20°C or more outside, it's hard enough to endure and feel comfortable. That's when the Tent Stove comes to the rescue.

For a long time, traditional candles and kerosene lamps were used to heat the tent. This was almost always enough, but with the advent of new, fairly large and voluminous tents, the issue again became quite acute.

237 (kg) Big Fish from Ice in a Few Hours of Fishing

Detained poachers told the secret of their success for a good bite. Fish inspectors were surprised by the absence of prohibited equipment ...

Modern gas equipment, widely used in industry and tourism, came to the rescue. Anglers quickly realized that it was not enough to buy the right tent for winter fishing(http://kiwi-market.ru/catalog/zimnie_palatki/stek/), you still need to provide high-quality heating. And here the question arises, which stove to choose for a winter tent?

Stove for Tent: Fireman on Winter Fishing

In fact, it is very simple to make high-quality heating based on modern gas equipment. Its beauty lies in the fact that with its help it is possible not only to heat the tent, but also to cook hot food and boil water, thanks to which comfort and utility are increased many times over.

In order to heat the tent for winter fishing, the angler will need a five-liter gas cylinder, a hose of suitable diameter, and a reducer that will evenly dose gas and convert the pressure at the inlet and outlet. And the angler will also need a terminal element that will burn gas, converting it into heat.

Quite often classic tourist tiles act as such an element. Its power is quite enough to heat a double tent. In addition, such tiles are successfully used in cooking. Recently, quite powerful gas heaters, which operate on the principle of "turbo lighters", are gaining popularity. The gas is supplied to the hot coils of the heater and burns out almost completely, transforming into a large amount of heat.

The power of such heaters can reach several kilowatts, which is quite enough to heat a large three or four-person tent. You can hardly use such a device for cooking and boiling water, so anglers are forced to have both devices, swapping them if necessary. We should not forget that the gas cylinder must be placed outside the tent. This will eliminate the unpleasant consequences that may occur due to gas leakage.

Do-it-yourself winter tent for fishing. How to make a tent with your own hands! A comfortable and spacious tent is one of the most important attributes for winter fishing. You just can't do without it. Often, in anticipation of a bite, fishermen have to spend hours in severe frost and wind. Well, if there is a tent nearby, in which you can periodically warm up. But what about those who can't get it? After all, this pleasure is not cheap. Today we will tell you how to make a tent with your own hands. This process does not require special skills and knowledge. Types of winter fishing tents To begin with, you must decide on a suitable design. We list the main types of tents: Umbrella. For the manufacture of the frame, dural rods or tubes are used. The finished structure has rigidity and increased strength. Any synthetic fabric is suitable as an awning. Often they are used in combination with tarpaulins. Automatic tent. This option is not as common as the previous one. Distinctive feature design is that the tent is sewn to an elastic frame, and then folded into a circle. Frame on arcs. Such a model consists of 2-3 arcs made of fiberglass or duralumin. The structure quickly unfolds in place. An awning is being pulled over it. What shape can a winter fishing tent have? Cube, triangle, trapezoid and so on. The choice is yours. What requirements should a homemade tent for winter fishing meet? The main function of the tent is to protect a person from adverse weather conditions (wet snow, strong winds). It also improves the comfort of fishing. Under the awning, you can cook food and tea, as well as warm yourself using special heating devices. Of course, on sale there are a variety of tents for winter fishing. The photos attached to this article prove to us that home-made designs are no worse than store ones. So, to business. What should you pay special attention to when sewing such an important attribute? Do-it-yourself winter fishing tent must meet the following requirements: 1. Have a light, compact and mobile structure. This is quite understandable. Some fishermen will prefer to freeze for several hours than to carry an extra load on themselves. 2. Quick to unfold and easy to install. 3. It is desirable that a do-it-yourself winter fishing tent be made of thick tarpaulin or waterproof fabric. 4. A truly strong frame is obtained from aluminum and composite materials. But plastic is not recommended. 5. Keep warm inside the tent. It would be nice to achieve this without heating devices (portable, gas and others). But this is a utopia... What materials and tools will you need? A do-it-yourself winter fishing tent is a great solution that will allow you to save a lot of money. We propose to assemble a fairly simple design. This is a tent based on a standard box, which can be purchased at a fishing store. We will also need: one pair of children's (very small) and school skis (up to 160 cm long); several duralumin tubes (you can remove them from ski poles); old folding bed; waterproof fabric (will be used as an awning). Do-it-yourself winter fishing tent: instructions All the necessary materials and tools have been prepared. Now you can move on to the practical part: 1. We take duralumin ski poles . Of these, we will make vertical tubes of the frame. As for the horizontal tubes, they should be a little thinner. The upper joints of the ribs of the future tent are made in the form of tees, which end in cylinders (length 5 cm). It is very important that the diameter of the cylinders is the same as that of the connected tubes. 2. We proceed to fixing the lower ends of the vertical tubes to the skis. The shaped lock plays the main role here. At the lower end of the tube we find the T-shaped tongue, and then carefully insert it into the metal plate fixed on the ski. It remains to rotate the tube 90 degrees. 3. To connect the frame of the tent with the box, we use 2 duralumin tubes bent at the ends from the old folding bed. The end of the docking product must be fixed to the end of the bent tube. At its other end, we install a latch, which, during docking, with its tongue will fall exactly into the hole on the second bent tube. 4. The box will be connected to the tubes mentioned above using round lugs arranged on ski racks. They can be made from copper or steel strip, and then attached to the racks. 5. Now you need to pull the awning. On the lower edge of the material we install metal plates with slots. It is in these slots that the U-shaped brackets driven into the side ends of the skis will pass. We fix the connections with shoe laces. To keep the tent well on the ice, you need to equip it with anchors (2 pieces). Each such anchor is a penknife with two blades at the ends. Assembling the tent on site Making a winter tent is only half the battle. It needs to be properly assembled and installed. The algorithm of actions is as follows: 1. We connect the halves of the bent tubes with the skis. The tongues should fall into the slots of the plates. The tubes are located along the axis of the skis, and then rotated 90 degrees. 2. We pass the ends of each pair of tubes through the lugs on the ski racks. 3. We connect all 4 skis. The tongue of the lock of the bent tubes should click into place. 4. Let's start installing the box. 5. We carry out the installation of 4 vertical racks at the ends of the skis. 6. Now you need to install tees on the ends of the tubes, and then connect them to the roof tubes. 7. We combine the holes of the tubes and tees. Wires will run through them. 8. Pull the awning onto the frame. Through the brackets and tongues available on the skis, we thread the carabiners and plates. We fix the connections with laces. 9. At the end of the process, we attach anchors and install them in pre-prepared holes. Conclusion Now you know how to make a tent with your own hands, what materials and tools are required for this. By following the recommendations and instructions described above, you will be able to create a stable and reliable design.

HOLD

Many anglers who are fond of winter fishing are interested in the question of how to make a good tent with their own hands. In this article, we will talk about why this accessory is needed, consider possible designs and alternatives.

Purpose

The main purpose of the tent is to protect the angler from the adverse effects of the environment. In our case, it is snow, wind and cold.

Thick snow clogs the hole, makes it difficult to register a bite and falls asleep all around. And if you add wind and cold to this, then fishing turns from pleasure into torment. Another function is protection from onlookers. As strange as it may sound, but if you are fishing in a reservoir with a lot of fishing pressure, then the presence of such a protective tent will be very important even in mild weather. In addition to annoying interlocutors, you will also get rid of unwanted neighbors. Many anglers during the absence of a bite actively monitor the reservoir for the presence of fish from their colleagues. During such periods around more lucky anglers small fishing towns may gather. A tent can not only shelter you from the weather, but also from other anglers if you so desire.

Constructions

There are many design options. Which one is better to use depends on how often you change places. If you intend to sit in one place all the time, then tourist tents with tension slings are quite suitable for you. For sea fishing, designs are needed that are quickly assembled and have no big weight.

Stationary

To make such a shelter with your own hands, you need to install a frame and pull an awning over it. As a frame, you can use a collapsible structure of various layouts. The awning is fixed both on the racks themselves and with pegs hammered into the ice. It can be sewn with your own hands from a tarpaulin or other dense material that is not blown and does not get wet. The awning needs to be made a little larger than required. The lower edge of the awning should lie on the ice (about 15-25 centimeters). This area is covered with snow, which prevents the tent from blowing from below. This cover is mainly used for night fishing, which implies fishing in one place.

Easy to install

Tents of this type are an awning into which spring steel rods are sewn. These rods hold the tent open. The arrangement of the rods may provide a hemispherical, cubic or triangular shape. The latter is the easiest to do, but it has the smallest internal volume, which can cause inconvenience when fishing.

It is better to sew an awning with your own hands from nylon or nylon. Tarpaulin is no longer suitable here, since it has a lot of weight. Such a tent is quick to set up and easy to transport.

On the basis of the sled

Sledges are an indispensable thing for winter fishing. They can also be used as a base for a tent. On the sled, you can mount a rectangular frame made of aluminum or plastic pipes on which the awning will be put on. For convenience, the frame can be made collapsible. Such a shelter can be transported as an assembly.

A more complex option is a folding fan-type design. Such a mechanism is also used in baby carriages for a lowered visor. In this case, the awning is attached to a set of U-shaped pipes. Folding frame on the basis of the sled - great option for anglers who actively move around the reservoir in search of prey. Installing such a tent with your own hands will take no more than 20 seconds.

panel house

If you are a car owner and love the comfort of fishing, you can make your own shelter from plywood or chipboard sheets. But it will be more like a fishing house. You will need 6 sheets of pre-cut holes for windows, doors and holes. You can make sandwich panels that consist of two sheets of plywood and an insulator. Such panels have good thermal insulation properties, and their use in your house will ensure the comfort of its inhabitants.

Alternatives

Oilcloth

If you do not have a tent, then you can use the most ordinary oilcloth. In this case, the angler himself serves as the frame. It should be said that this option is not suitable for fans of very active sweeps, since with such movements the oilcloth will fly off. An ice ax or a pick stuck into the ice can be used as a stand. The lower edge of the oilcloth must be bent inward and fixed with improvised objects.

You can also sew a large bag from oilcloth with your own hands, which is put on the fisherman.

Such a shelter greatly restricts the movement of the angler and is not suitable for fishing on a balancer.

The advantages include the minimum cost and very fast installation. This is a great option for ice fishing enthusiasts who don't sit still and don't want to spend money on purchasing or making a more expensive shelter.

Tourist

If you have a tourist tent, then it can also be used for winter fishing. It is very good if it has a bottom. To use such a shelter for winter fishing, it is necessary to modernize it - to make a U-shaped cutout at the bottom, through which access to the holes will open. We also recommend adding a zipper. Tourist tents are less expensive than specialized fishing tents, and they can also be used for outdoor recreation.

If you plan to fish at night, then feel free to install a stationary shelter, but before that, inspect the ice for the presence of scours, which can reach your parking lot by morning. For lovers of fishing on a balancer, a fan-type design made by hand on the basis of a sled is perfect. If you do not want to spend extra money - a bag of oilcloth is just for you.

Heating a winter tent is an important topic. Both the possibility of fishing in the cold season and its result directly depend on the heat inside the fishing shelter. In this review article, we tried to collect all the known options for heating a tent for winter fishing - with the obligatory indication of the disadvantages and advantages of each of them. With all that, we have tested and evaluated some of the methods personally, which will also be mentioned in the following story.

Solid fuel mini oven

Long gone are the days when there were no modern portable gas stoves, and stoves were a rarity. Fishermen at that time used home-made mini-stoves to heat winter tents - welded from sheet iron, or hastily welded from some metal containers. Such stoves usually ran on wood, although other solid fuels, such as coal, could also be used.

One of my railway acquaintances, in the world an avid bream hunter, in the late 80s regularly fished in our surrounding water bodies - the Revdinsky city pond and. He heated his tent with a homemade coal stove. According to his reviews - "it was so hot that he was sitting in a T-shirt."

There were a great many designs of these stoves. Here, as they say - who was much for what. However, the principle was the same everywhere - a firebox, a stand (so that the ice does not melt) and a chimney pipe that went out through a special hole in the tent wall, edged with a non-combustible material like fiberglass. In other words, a miniature potbelly stove.

Nowadays, mini-stoves have been superseded by more efficient and compact devices for heating a tent. However, this does not mean at all that no one now heats a tent with firewood. In rural areas, especially in some villages far from cities, this is still a very popular method, sometimes the only possible one.

• Pros: cheap or free fuel, good calorific value.
• Minuses: cumbersome design, complete uselessness in the absence of firewood in the place of fishing, the need for a large amount of fuel (the aforementioned acquaintance dragged an average bucket of coal for fishing). In addition, I had to periodically throw firewood into the stove, distracting from fishing.

Primus

With the advent of "lights", "bumblebees" and other gasoline burners, wood stoves began to gradually fade into the background. And for quite a long period of time, the fishing tents were heated with stoves. Even now, there are still many adherents of this method.

On several fishing trips, I had a chance to use the rather mass-produced primus stove "Dastan". I will say this: power. This is probably the warmest way to heat a winter tent, and even the preliminary fuss with kindling the stove, as well as some stink of fuel, does not overshadow this fact.

• Pros: compactness, excellent calorific value.
• Minuses: difficulty in use. And to this day there are legends about the "reliability" of stoves, but here - again - it all depends on the manufacturer, the specific model and the specific product. For example, imported primus stoves are quite well made, like some Soviet ones.

Oil burners (multi-fuel)

In fact, these are the same stoves, only a high-tech version. They are devoid of most of the shortcomings of the "bumblebees", you can also use all sorts of diffusers-afterburners (which you can’t put on a regular stove), thereby increasing their efficiency.

• Pros: excellent calorific value, versatility in terms of fuel used.
• Minuses: high price.

Gas hob with 5 liter propane tank

Another old proven method of heating a tent, which is still in full use today. If the balloon is left outside, the tile itself takes up very little space.

One of my acquaintances, a fisherman, has been using such tiles for a long time, and it doesn’t blow in his mustache.

• Pros: long operation from one filling, excellent calorific value (models existing on the market are very powerful), greater reliability and safety compared to stoves.
• Minuses: the bulkiness of the structure and its increased weight, the likelihood of gas freezing in severe frosts (especially if the cylinder was not pure propane, but its mixture with other gases).

Gas stove or heater on disposable cylinders

Appeared relatively recently and gained good popularity. Could even displace other methods of heating tents, if not for one significant disadvantage, which is discussed below.

The author of this article actively uses a gas heater (power of the order of a kilowatt) for winter fishing, and knows fishermen who are also heated by such equipment. Previously, I had to use tiles several times - they heat quite well.

This category could also include gas lamps However, their calorific value leaves much to be desired, so if they are suitable for heating a winter tent, then only during mild cold weather.

• Pros: compactness, you can also add affordable and relatively inexpensive fuel here.
• Minuses: the main one is the probability of gas freezing already at light frosts (thin-walled cartridges are designed for gas mixtures with a lower vapor pressure, evaporating at higher temperatures). How to deal with this - it is written in. In addition, some tiles and heaters are very limited in power, which somewhat reduces their effectiveness during severe frosts.

Paraffin candles

The power of one candle is about 40 watts / hour. Not such a small number. It turns out that four dozen candles may well compete in terms of heat generated with a portable gas heater.

The author of these lines more than once had to heat the fishing tent with ordinary candles. It is safe to say that this method works great in mild frosts with the right number of candles: the holes do not freeze, and it is quite comfortable in the tent.

• Pros: lighting, simplicity, no need for additional equipment.
• Minuses: low power (the stronger the frost - the more candles are needed).

Dry fuel

Some types of dry fuel, for example, "dry alcohol" tablets, burn for 10-15 minutes without soot and odor. The specific heat of combustion of this fuel is 30 mJ / kg, which corresponds to 8.3 kilowatts. You can go further and calculate the "power" of one tablet. It is approximately 332-498 W / h. Therefore, dry fuel can be used to heat a winter tent.

A fisherman friend of mine once had a chance to heat a tent with dry fuel while winter fishing (on the river), and not just anyhow - but during an overnight stay. I took quite a few tablets with me - several packages, but it took only three to heat. It was not possible to freeze at that night (considering that outside the thermometer did not fall below -10°C). How to sleep well.

• Pros: high calorific value, ease of use.
• Minuses: the need to be distracted every 15-20 minutes to ignite a new tablet. It is possible that this problem could be solved by a special stove, where several tablets could be loaded at once, and then the process of their burning could be “stretched out”, limiting the supply of oxygen. However, so far no one has invented it.

Alcohol

The specific heat of combustion of alcohol is 27 mJ/kg, which is almost two times less than that of natural gas, but it is quite enough to use alcohol as a fuel for a tent heater. And some fishermen - who have constant access to supplies of this substance - do just that, using homemade tin can spirit lamps as a heater. Nevertheless, most anglers consider this approach to be unreasonably wasteful, if not blasphemy, and it is understandable for what reason.

• Pros: good calorific value.
• Minuses: relatively high cost of fuel, or difficulty in acquiring it.

The angler himself

The human body, it turns out, can also be considered as a heater. At rest, it produces an average of 60 watts of heat per hour. Therefore, with a small "minus" - after setting up the tent - the holes usually stop freezing, and a heater is not required.

• Pros: nothing extra is needed.
• Minuses: small power, sufficient only for "warm" winter weather.

The sun

To some, this item will seem even more frivolous, but in fact the sun's rays have a very high calorific potential. Especially when you consider the fact that during the winter in our hemisphere, the Earth is at its closest distance from the Sun.

On clear windless days - even in 30-degree frosts - you can notice the appearance of icicles on dark objects partially covered with snow. This is due to the fact that the sun heats them up to a low positive temperature, at which the snow begins to melt. And the temperature difference here clearly exceeds 30 degrees, which is quite a lot.

The sun also warms up the fisherman's tent a little, though with a very tiny part of the heat of its rays. And the lion's share of this heat is dissipated into the external space - due to reflection from the fabric and cooling it with cold air constantly circulating outside.

Somehow it is necessary to direct the solar heat inside the tent, but at the same time minimize its return to the outside. The prospects for this method of heating are obvious, and it is quite feasible even with modern technologies. But so far there are no practical developments in this direction. Who will take care of it?

• Pros: free energy.
• Minuses: useless in cloudy weather and dark time days. Well, as mentioned above - at the moment, the full use of solar heat to heat a winter tent is just a theory. But in practice, it turns out that in sunny weather we have a small bonus - five degrees to the main source of heating, whether it is a stove, stove, burner, or a heater.