How to choose the best bike lock? There is a whole mass of individual varieties of anti-theft agents. Let's try together to figure out which product will best protect the bike from the actions of intruders.

What is useful to know about castles?

To select the most effective remedy to protect the bike, you need to understand the types of locks, have information about the advantages and disadvantages of certain models.

When choosing a lock for a bicycle, it is necessary to take into account possible parking places. Most of the products are designed to protect two-wheeled vehicles, which are left in special parking lots in front of buildings. However, if you wish, you can choose a reliable means for fixing the bike to a lamppost, pipe or bench.

Whatever type of lock is suitable for a cyclist, whether it be a metal cable product, a bicycle chain lock or a U-lock system, you should always remember that the miser pays twice.

Which is better - a lock with a key or a combination mechanism?

The mechanism of action of systems for blocking the chain and wheels is based on fixing these elements in a static position, which prevents the rotation of the mechanisms. It is recommended to fasten the bicycle with such locks on a short time. Indeed, in case of theft, the attacker, at best, will have to carry the bike on his own shoulders.

To reduce the likelihood of theft, as well as causing any damage to two-wheeled vehicles, it is recommended to adhere to the following recommendations:

1. It is better to fasten the bike in the most crowded places. Naturally, this will not be able to stop a skilled cracker, but it will certainly make beginners think.
2. It is worth using several locks at the same time. Hacking them will definitely take more time from the attacker. In addition, fixing individual parts of the bike will protect against those who hunt, for example, for the wheels or the trunk of a vehicle.
3. When using multiple anti-theft tools, it is desirable that one bicycle lock be a U- or D-shaped, because it is not so easy to quickly break a thick metal arc.
4. Switching bike systems to low gears helps to catch up with a burglar. Even by pedaling furiously, an attacker will not be able to move faster than a walking pace. Naturally, this option is effective only if the bike is constantly in the owner's mind.

Everyone knows the word bike parking, but the bike parking itself in a number of places in our country remains exotic. And the situation itself is not always calm and a bicycle left for a while in its entrance, in the country house or in the yard of a private house can leave without an owner, either for a ride or for good. It has been noticed that a bicycle fastened to something stationary attracts less attention than one standing without a lock or with a lock on the wheel. From misunderstandings "took a ride" will protect a simple device.

How to make a bike lock hook

A ring head screw works very well as a hook for a lock. The screw is purchased at the hardware store. Installation on a wooden surface is easy. The height of the screw installation from the floor is determined. A small hole is drilled with a diameter equal to half the diameter of the screw. A screw is screwed into the hole with your own hands up to the very cap. A screw is screwed without a special tool - a metal object or a wooden stick is installed in the ring as a lever. For installation on a concrete or brick wall, you must first install a suitable plastic dowel, and then screw the screw into it. It can be installed tightly using, for example, a chemical dowel.

Hole being drilled Parking hook Bicycle parking at the hook

The driver who purchased vehicle, immediately thinks about how to secure it and protect it from burglars. In the automotive market, there are many anti-theft products, alarms, immobilizers and mechanical systems that can protect the unit from thieves and burglars.

Dear readers! The article talks about typical ways to solve legal issues, but each case is individual. If you want to know how solve exactly your problem- contact a consultant:

APPLICATIONS AND CALLS ARE ACCEPTED 24/7 and 7 days a week.

It's fast and IS FREE!

However, not all residents Russian Federation there is enough money to buy a car. good choice I have a car loan from a bank.

But many Russians buy bicycles because of traffic jams and fuel economy, as well as simply for the love of clean air and nature.

Therefore, all bike owners should take care of the safety of their vehicle.

How often are bicycles stolen?

With the development of sports in the country and the relevance of healthy lifestyle life, many people in the country are switching to an alternative mode of transport - bicycles. The number of sales is growing every year in proportion to the number of stolen "iron horses".

This trend has been observed for several years. Indeed, in order to receive money in order to sell goods, stealing a bicycle is much more profitable.

The first reason is accessibility. Stealing a “bike” standing under a store or lying near a house is much easier than pulling a phone out of your pocket, no special skills or manual dexterity are required.

The second plus is that the cost of a mobile phone and a bicycle in pawnshops is identical. Therefore, the attacker follows the path of least resistance and resorts to stealing two-wheeled vehicles.

Steal absolutely different bikes, starting from cool trendy models and ending with simple "ashanbikes". Stolen vehicles are given away for free on the black market or rush to a pawnshop.

This applies to average and lower class goods. More cool bikes are taken away from the city and resold in neighboring areas.

The second implementation option is to disassemble the unit in parts and sell spare parts on the market or through flea markets, forums, and so on. After all, finding the stolen "great" is almost impossible, in comparison with the car.

The state structures of the country do not keep special statistics on the theft of two-wheeled vehicles. Keeping track of the thefts is unrealistic, and not everyone turns to the authorities and writes statements about the abductions.

It is safe to say that the number of stolen bicycles is not inferior to the number of stolen cars. Therefore, the bill goes to hundreds of units for big cities, such as Peter and Moscow.

If we take in total, then about a thousand bicycles are stolen in the country per day, not taking into account unofficial data. Therefore, the protection of a two-wheeled vehicle has become an edge for their owners.

What are the ways to protect

As in the automotive industry, there are certain ways and schemes among bike owners to protect their units.

Often these are mechanical devices with which the bicycle is attached to special mechanisms or the components of the unit stick together, which makes it impossible to move.

The most common bicycle lock is the lock. Conventional coiled cables have already gone out of fashion. Attackers easily bite them with special tongs.

There are two types of locks on the unit: these are simple padlocks and combination locks. With such anti-theft devices, leaving a vehicle on the street without supervision will no longer be so dangerous.

The cost of these devices varies greatly. You can buy an ordinary and simple castle for 300 rubles.

However, the most expensive and cool locks, which are considered respectively reliable, cost about 1000 rubles, some reach up to 2,000 rubles. Therefore, it is up to you to choose which lock to buy.

Incomplete

A very interesting way of protection, which is a fairly effective barrier to theft, is to disable the unit.

When the owner of a two-wheeled vehicle wants to be away from him for a long time, then a useful solution would be to remove an important part from the bike, without which he will not ride. Such components can be both the steering wheel and the wheels.

In this scenario, the thief will no longer want to steal a semi-disassembled bicycle, and he will go looking for another one. However, there is a minus - where to put those parts that you unscrewed, not to carry them with you.

Therefore, it is beneficial to use this method of protecting a bicycle from theft when there is a place where you can hide components. Well, for example, when visiting a friend or relatives, bring the steering wheel or wheel to the balcony and so on.

This method does not require cash costs, but only devices with which you can unscrew the parts.

The second free way to protect a bike from theft is to make it look bad for sale. The main goal of the attackers that steal the units is their further sale in order to receive a monetary reward.

Respectively appearance cycling is of great importance when choosing a victim. That is, by making your transport unattractive and ugly for others, you will protect it from theft.

Most bike owners paint the frame in different colors, write inscriptions, paste stickers and the like. The price of such passive protection is the cost of paint or stickers, on average 100 - 200 rubles.

The absence of a chain will put your bike in serious doubt. After all, the attacker will think more than once, but is it worth it for him to carry the stolen goods in his hands or drag him on himself?

This method is suitable only for skillful owners of the units, that they can both remove and hopefully the chain without any problems. The cost of this method is your skill.

Alarms

As for vehicles, cycling has its own electronic anti-theft means. These types of devices include alarms.

This is the most expensive way to protect your bike from theft. The average price for electronic protection fluctuates around 1000 rubles.

Do-it-yourself bike theft protection

Effective ways to protect bicycles are homemade devices. All mechanisms that are invented by hand are mechanical devices. Their goal is to block the movement of cyclists.

These include various cables with locks, home-made locks for turning the steering wheel and wheels, that is, everything that the owner has enough imagination for.

For example, wrapping the spokes of the wheels and the frame with metal wire is already a lock and an anti-theft system.

To protect your bike from theft, you need to follow certain rules:

1. Never leave the bike unattended and after leaving for 1 minute it is better to fasten it with a lock for some kind of support.
2. Always look at the place where you fasten the bike. It is possible that you can steal the unit along with the support, huh?
3. Do not fasten the bike for only one part, the wheel, handlebars or seats. It is necessary to properly fix all the components. After all, when you come from the store, you can see a fastened seat without a bicycle.
4. It is not necessary to fasten bicycles at all in places where there are a lot of people.
5. Be careful when storing bicycles in corridors and stairwells, do not neglect protection.
6. Do not leave valuable accessories or smoke on your bike. This only draws the attention of intruders to your transport.
7. Protecting a bike from theft with a pole buckle is the most effective way.

A bicycle anti-theft lock is usually a cable or chain with a lock at the end, with which the owner wraps around the spokes of the wheel, the frame and the element of the lattice or bike rack.

thefts expensive bikes, theft of wheels is a common phenomenon, and it is handled by technically trained people. The chain or cable is silently bitten with a bolt cutter, the bike is put in the car, the crime scene is left. Only a bitten anti-theft lock remains in place.

During the production of serial anti-theft lock At the forefront, manufacturers put the following qualities:

• attractive appearance;
• minimum weight;
• the convenience of use;
• competitive cost of the finished product;
• speed of use;
• bite resistance.

Satisfying all the requirements at the same time is impossible, and in the end, it is even profitable for manufacturers to make easily biteable devices. They will buy new ones, because they cannot be repaired. The owner of a stolen bike will be forced to increase security by acquiring an expensive, but no more bite-resistant lock.

There is no technique against scrap, but the capabilities of the bolt cutter are limited by its geometric parameters. Biting thin chain links, 4-5 mm thick, or a cable with a diameter of up to 15 mm is not a problem for a specialized bolt cutter.

It is no longer easy to bite a bolt with a diameter of 12-14 mm, with a strength class of over 8.8, you will need a grinder, which is already used much less frequently. A chain with a link thickness of 8 mm or more in diameter will weigh a couple of kilograms, which in some cases is unacceptable.

Unfortunately, the consumer demands that it be easy, clean, beautiful, fast, cheap, but not stolen. This is almost impossible to achieve. The specificity of fastening a bicycle to various structural elements of a pole or lattice encourages the use of a chain or cable inside a rubber or plastic hose, or with a heat-shrinkable PVC film put on and crimped. It is not difficult to make a similarity of a purchased product on your own in the presence of a lock, a chain and a decorative hose, and the manufacturing measures are obvious.

Let's try to execute another version of the anti-theft lock.

A chain or cable can be replaced by a metal strip 4-5 mm thick, 40-50 mm wide, one part of which is attached to the frame with an overlay, the second to an element of the concreted structure of the bike stand or grate.

The meaning of the design is to slip a thick and wide strip of metal or rather thick bolts under the bite. If the strip will have a hinged joint - as an element bicycle chain, then can be folded like a folding ruler. The locking element can be made from a bolt, which can only be unscrewed with a special wrench. The L-shaped hex key is cut off, and the minimum possible 5-7 mm remain under the protective overlay. To the bolt - do not crawl from the sides, only the L-shaped hexagon or torx of the owner fit under the lining. The nut on the reverse side of the strip is welded, compressed tightly. In the same way, the technical issue of “crimping” is solved on the other side of the folding anti-theft piece of iron.

You can make this product yourself. By painting the details and solving the issue of transport placement on the bike frame, you can reliably and aesthetically protect the bike from theft, and get a convenient and non-standard device.

Hijackers, people are cautious, and they simply won’t solve atypical tasks, it will be easier for them to find another bike with a regular chain.

As the number of bicycles increases, so does the number of bicycle thefts. To secure their property, owners use bike locks. However, cheap models are not reliable, and buying more durable options can hit your pocket hard. How to make a bike lock with your own hands will be described later.

Advantages and disadvantages

Like any other anti-theft device, a homemade bike lock has its pros and cons. Here are its main benefits:

• When using a thick steel chain, it is almost impossible to cut through.
• Low manufacturing cost (most materials are on the farm).
• You can independently make a lock of any appearance and configuration. The owner can choose the color and size of the product. Therefore, each bike lock will be unique in its own way.

However, a self-made device has its drawbacks:

• Building a castle takes time and effort.

• The lock itself can be opened by a fairly quickly trained bike thief (this problem is solved by purchasing a more expensive and reliable lock, but in this case manufacturing costs will increase significantly). Therefore, it is still not recommended to leave the bike unattended for a long time.

Important! Another significant disadvantage of homemade is its big weight. This problem can be partially solved by competent selection of a chain and a padlock.

Necessary materials

Before you start making a bike lock, you will need to stock up on some equipment and materials.

• Iron chain about 60-70 cm long. Any will do option. But the stronger (in this regard, steel is significantly ahead of aluminum) and thicker the chain, the more difficult it will be to bite it. Too bulky bike lock will also not be very convenient, so here you need to look for a middle ground. The chain can be purchased at a nearby hardware or hardware store.
• Textile. Any type of fabric can be used for the cover. But dense and durable materials that repel moisture are best suited. Alternatively, you can sew a cover from old jeans. Perfect for this purpose and raincoat fabric.
• Thread and needle. Required for stitching fabric. For convenience, it is better to use a sewing machine.
• The padlock. It is with his help that the chain will close. You should choose a medium-sized lock so that it does not take up much space, but at the same time it is sufficiently reliable.
• Dye. If desired, you can paint the parts of the chain that are not covered with a cloth.

Necessary materials for the manufacture of a bike lock

The cost of a padlock is 100-150 rubles. An old chain can often be found on the farm, as well as fabric. But even if you buy them, the cost of manufacturing will not exceed 300-400 rubles. And this is significantly lower than the price of a good bike lock in a sporting goods store. At the same time, the quality of the product does not suffer at all.

Manufacturing

Creating a bike lock with your own hands can be divided into several steps:

First step

If an old chain is used for manufacturing, it must be cleaned of rust. To do this, you can use white vinegar or a specialized solvent. However, the best effect is brought by metal processing with abrasives. After that, you can paint the extreme links (this is not a prerequisite for a new chain, but it is better to process the old metal further - this will prevent rusting and improve the appearance). Acrylic paint can be used here (it is advisable to choose a coloring matter based on metal).

Second step

Next, you need to prepare a fabric cover. When creating it, you can use different kinds materials, but it is better to choose a water-repellent or breathable option (this is necessary so that the chain under the cover does not rust). It is also desirable that the fabric stretch. In this case, the cover is sewn exactly to the thickness of the chain and a few centimeters shorter (the stretchy fabric will eliminate the knocking of the chain during trips). If the material is not capable of strong stretching, the cover must be made somewhat wider. The main thing is that it does not hamper the movement of the chain. Also, some types of fabric require processing so that the edge does not “crumble”. When the case is ready, it can be put on the chain.

Third step

Now you need to connect the extreme links of the chain with a lock. It can also be purchased at a hardware or hardware store. Almost any lock will do. The main thing is that it securely fastens the entire structure. It is also better to choose a model whose shackle thickness is equal to the thickness of the chain link (otherwise it does not make sense to buy a thick chain, because the lock will become weak point products).

DIY Combination Lock

Important! It is most convenient to use a snap lock. The main thing is not to leave the key at home.

This completes the manufacture of the bicycle lock. Now you can test it in action.