The appearance of its own pool on suburban area can be compared with the materialization of thoughts after watching Hollywood movies. If you think about it, such an element of the landscape can radically transform appearance territory, making it visually brighter. In this article, we will consider what a pool in a polycarbonate country house is, and also learn how to make its bowl.

It must be admitted that although our country is rich various types reservoirs, but not everyone and not always can treat themselves to swimming in them. Therefore, if "the mountain does not go to Mohammed ...", then you can turn your own site into a kind of lake shore.

A polycarbonate pool is one of the easiest ways to achieve this. At the same time, it should be understood that we are talking not only about the bowl, but also about sheltering the structure from atmospheric influences.

Why do we need a pavilion

Thanks to this design, you can really improve the performance of the pool.

• protect the summer pond from debris, in particular, branches and leaves from trees in the area, which will reduce the number of cleanings;
• will make it possible to use it even in rainy or very windy weather. Often a heater is placed in the room, warming the bathers even in the cold season;
• allows you to extend the life of an artificial reservoir, keeping it from the summer heat and saving it during conservation in the winter;
• will not let the water cool down quickly, which will give great savings in electricity;
• protect against ultraviolet radiation during water procedures;
• will become another place protected from prying eyes to relax.

Tip: if it is not possible to make a stationary pool, find out on our website how to install an inflatable one.

Pros of polycarbonate

Of course, you can make a bowl from different materials and the industry is ready to contribute to this. However, many experts are inclined to believe that polycarbonate is the most successful option.

Below we consider its positive characteristics:

1. Weather resistant.
2. Resistant to biological influences, it is noticed that algae and harmful microorganisms do not grow in such structures.
3. The price of arranging the pool depends on the size of the structure and will not exceed $10,000 excluding the pavilion. For example, a concrete bowl will cost $85 per sq. m, and from propylene - for $100.
4. You can do all the work yourself and in a short time.
5. The material is light and does not present difficulties for its delivery to the construction site.

Tip: to solve the problem of uninterrupted power supply to the country house, renting a diesel generator for the country house will help.

Constructions

Above the pool, you can install various structures that differ from each other in the degree of protection. There are two main areas:

Also, the structures differ in height above the pool:

Another structural feature of shelters, their ability to be:

• sliding, when convenient operation occurs due to the fact that the sections are installed on rails. Such structures are difficult to manufacture, but are in good demand. This is due to the mobility of the structure;
• stationary, when shelters are installed above high artificial reservoirs made of polycarbonate.

The design of the protective structure depends on the pool bowl and can be:

• rectangular;
• round;
• combined, used for non-standard bowls;
• domed - usually over a round bowl;
• arched or pitched, where there must be vertical walls and arched roof. Usually such structures big size, capable of accommodating, in addition to the pool, a recreation area, and even a small front garden.

Tip: if you don’t want to build a house on your own in a suburban area, ready-made country houses from block containers with all amenities are offered.

How to make a pool yourself

Below is the process instruction:

1. Choose a site that should not be the lowest in the territory and located no closer than 15 m from a residential building. Also, make sure that the crowns of trees do not obscure the future structure, and that there are no power poles nearby.
2. Clean it up and mark it up.

1. Dig a pit. Try to make the walls even and dense.

Tip: if the ground in the area is too soft, deepen the hole to a hard layer so that groundwater does not damage the building.

1. Make drainage, for which, not far from the pit, dig a hole deep below the pool. It is designed to drain water from an artificial reservoir. For this, prepare a drain pipe, one end of which is installed at the bottom of the wall of the structure, the other - out into the drainage tank.
2. Make a frame from dried pine wood, which must first be treated with an indelible antiseptic.
3. Treat the lower parts of the timbers approximately 500 mm with bitumen to protect them from decay and pests.
4. Dig in the corners of the pit with your own hands and along the perimeter of the prepared pillars, watching their horizontal level.
5. Backfill the bottom of the pit and tamp down with layers of gravel and sand.
6. Fill from above with a cement-sand screed 100 mm high.
7. After the mortar has hardened, tie the posts together with boards.

Tip: you can play it safe and put an awning fabric that does not let water through on the bottom before installing polycarbonate, choosing the right color.

1. Install the polycarbonate base over the entire frame area. Due to the good flexibility of the sheets, you can make a pool to give the desired shape in a short time.

1. Seal the ends of the sheets with special adhesive tapes for polycarbonate.
2. Carry out decorative work around the pond by installing non-slip slabs or similar materials around the edges. Don't forget the stairs for easy access to the pool.

Conclusion

From the article, you learned what artificial reservoirs are in a polycarbonate country house, as well as what structures are used to protect them from atmospheric influences. It was also told how you can independently dig and equip pools in the country.

The video in this article will help you find more information on this topic.

Add to favorites Printable version

9dach.ru

instructions, work steps, photos and videos

Today, a pool in a summer cottage is an affordable luxury. But it is important not only to design and build this element of landscape design correctly, but also to properly care for it. Sooner or later, the owner of the site has the idea that it is necessary to build a polycarbonate pool canopy with his own hands. This design will keep the pool clean and transform the local area.

Benefits of a polycarbonate pool cover

A pool covered with polycarbonate is practical and beautiful, because:

• the water in it is not polluted so quickly, respectively, the tank can be cleaned less often;
• you can use the pool during rain, strong wind and other adverse weather conditions;
• the canopy provides protection from ultraviolet radiation, so when swimming, you can not be afraid of getting burned or irradiated;
• the cost of electricity for heating water is reduced;
• water from the pool evaporates less intensively;
• the harmful effects of weather conditions in the autumn-winter period are reduced by the design and water systems of the pool.

Polycarbonate has recently become the most popular material for the manufacture of canopies due to the fact that it has the following advantages:

Classification of polycarbonate canopies for the pool by type of construction

There are two types of covers for the pool, fundamentally different in their design:

1. Stationary.
2. Telescopic, or sliding.

A pool under a stationary canopy can be safely called an indoor one, since the structure of the canopy is monolithic, it is installed on the foundation and, as a rule, occupies an area slightly larger than the water tank itself. It turns out a kind of separate building in which you can place furniture for the pool, bar, etc. Electricity and heating can also be connected to this room.

A telescopic canopy is a mobile structure that expands as needed and covers the pool in whole or in part.

Other classifications of polycarbonate pool awnings

Practical polycarbonate is the dream of any landscape designer, because with the help of this material you can make canopies, canopies and pavilions of any shape in any existing style. In addition, polycarbonate is perfectly combined with other materials. Coverings from it for the pool are obtained each time different in height, shape and color.

For example, it depends on the height of the structure whether the canopy will serve only as a shelter for water and communications (usually the structure rises about 1 m above the ground) or a full-fledged pavilion (the distance from the ground to the ceiling of the cover is 2 m or more).

The shape of the dome of the cover is:

The design, which is a synthesis of a metal supporting frame and a translucent polymer covering, would seem to fit perfectly into the high-tech style concept. But polycarbonate canopies over the pool are in amazing harmony with the classic, English and other styles of landscape design.

How to build a polycarbonate pavilion over the pool with your own hands

Design, procurement of materials and tools

Before proceeding with the actual process of constructing a covering, it is necessary to determine its shape, size and design. A design project can be created using a computer program, or you can simply draw a diagram on paper, not forgetting to display the dimensions in it. Then it will be easy to calculate the approximate consumption of materials.

You need to go to the construction market for the following materials and tools:

Foundation

Despite the relative lightness of polycarbonate, the volumetric cover made of it for the pool will turn out to be very heavy. This design is installed on a concrete foundation with a depth of about 50 cm. After the foundation has dried, it should be tiled, creating additional protection from moisture.

Usually, for polycarbonate structures, a frame is made of wood or metal. Near the pool, where water constantly evaporates, it is better to use metal. The creation of the frame, especially if the profiles need to be bent for an arched covering, is best left to a professional welder. If you have the appropriate skills and self-confidence, you can try to make the supporting structure yourself.

1. Profiles are thrown across the pool, forming arches. They are bolted to the foundation.
2. Next, you should stretch the arcs at a distance of 1 m from each other, and mount stiffeners between them.
3. You can connect the structural parts with bolts, or simply weld them to each other.
4. Metal parts must be treated with an anti-corrosion agent before sheathing.

Polycarbonate sheathing

Ongoing Canopy Maintenance

Despite the fact that polycarbonate is weatherproof and durable, it is necessary to monitor the hygienic condition of the pool cover, as well as take care of its metal frame. In order for the shelter to last for a long time, it is recommended to treat the frame with an anti-corrosion agent once a year.

Book a canopy?

We make canopies from polycarbonate and glass. At prices there are promotional canopies - a turnkey carport 3.6 x 6.3 = 63.000 rubles!!! a turnkey carport for 2 cars 5.7 x 6.3 = 128.000 rubles!!!

navesmaster.ru

Do-it-yourself polycarbonate pool in the country: how to build?

For everyone, rest is a different concept. But almost everyone likes to spend their free time near the water. Unfortunately, it is not always possible to go to an open reservoir, therefore people try to equip a swimming pool in their country house or near a private house.

To build a separate building for the pool, you will need a lot of expensive materials, hire highly paid workers to carry out the work and a lot of free space. Not everyone can have such resources, and one has to look for alternative, more acceptable options.

It is easy to equip a pool with a polycarbonate canopy on private territory with your own hands.

See also: Building a swimming pool in the country with your own hands

Why do you need a polycarbonate pavilion

An indoor pool has many advantages over an open one:

• canopies protect the pool from falling into the water of various debris from trees and other natural sources;
• it will be possible to swim in the pool under the protective structure even during bad weather: rain, strong wind;
• if you install an infrared heater in the room, you can really use the pool even in cold weather;
• shelter prolongs the life of an artificial reservoir;
• the pavilion will save energy, even in comparison with the fundamental building. Since lighting is not needed during the day, polycarbonate is a light transmitting material. You will not have to spend a lot of energy on heating water, as it will cool more slowly;
• in summer, a polycarbonate shelter will protect swimmers from harmful UV radiation;
• next to the pool you can place a recreation area.

Types of polycarbonate structures

Polycarbonate is a very plastic and strong material that has a wide range of applications in construction. various designs in construction.

For a pool in the country, these types of polycarbonate structures are suitable:

• partial canopies, having only an upper canopy or also several side ones;
• closed pavilions.

There is also a classification according to the height of the structure:

• low - up to 1 meter high above the surface of the pool. Designed solely to protect the pool from debris, while the pond is not in use;
• combined - part of the shelter is raised high, and the rest is located much lower. Suitable for pools that are used throughout the year;
• high - are divided, in turn, into those erected around the perimeter, close to the bowl or with a margin of space for a recreation area.

Typing by type according to the features of the frame made of polycarbonate:

• Sliding or telescopic - mostly low structures, very convenient to use. For proper functionality, the sections are mounted in special rails. A rather complicated design, compared with a simple canopy, but, despite this, it is very popular. With its help, without much effort, you can make the pavilion open or closed;
• stationary - it is this type of construction that is installed not by specialists, but by the owners themselves. This is a simple and intuitive type of structure.

The general view of the polycarbonate canopy over the pool depends on the type of bowl:

• rectangular;
• round;
• domed;
• asymmetric;
• pitched with two vertical walls.

Tips for those who don't have great experience in the construction of pools and similar structures made of polycarbonate:

See also: What is the best way to paint concrete

Some owners put an awning fabric under the polycarbonate base to be sure of the strength and waterproofness of the container.

The upper part - a canopy or a pavilion - is made depending on the type of construction chosen and the shape of the water tank.

svoidomstroim.ru

Do-it-yourself polycarbonate pool canopy: photos of interesting solutions

Today, swimming pools in private homes have become a luxury available to many. However, it is important not only to build it correctly, but also not to forget to follow it, while maintaining the proper appearance. The ideal means of protecting the pool is a canopy.

Why is it worth making a polycarbonate canopy over the pool?

A canopy for a polycarbonate pool is one of the main elements of its protection. The specific type of roof will help prevent water pollution from dust, insects, birds, foliage, trees and shrubs. Also, if you build a partially closed structure above the pool, then in rainy and windy weather it becomes possible to use it without any obstacles.

Classification of polycarbonate canopies over the pool

Any structure on a metal frame is currently technologically advanced and is popular among buyers. Canopies over the polycarbonate pool are divided into two types:

• Stationary fixed;
• Retractable awnings.

Stationary polycarbonate pool cover

This is a structure that is not removed and is fixed on a certain part of the pool. On average, the height of the structure is from one and a half to two and a half meters. The main advantage of this type of structure is the preservation of heat without connecting an additional source of heating.

Retractable polycarbonate pool canopy

Telescopic (sliding) - a canopy over the frame pool (and round), which is used only in the hottest months of summer. The big advantage of this design is its functionality: the roof can have a manual or electric control panel. Its significant disadvantage is its small height and lack of space for building when folded.

Each canopy has its pros and cons:

Canopy for a polycarbonate pool step by step

Although the presence of structures for pools is presented in large numbers in specialized stores, some seek to create a structure on their own. In this case, if you figure out how to make a canopy over a polycarbonate pool with your own hands, you can significantly save your money.

First you need to choose the appropriate type of structure for further construction. After that, it is important to select the necessary material and measure the length and width of the pool for drawing up drawings.

The choice of polycarbonate for a canopy

The definition of the type of plastic depends on several factors, basically, a specific coating is used for each type of canopy. Polycarbonate is divided into several types: cellular and monolithic.

A monolithic panel has more weight than a honeycomb panel, because. it is complete, so the price is much higher.

The main advantage of a monolithic coating is its service life, which exceeds the wear resistance of a honeycomb product by 3 times. The downside is its strength: the ability to damage cellular polycarbonate during operation is the highest.

An important condition when choosing the type of coating is its appearance. If you want your gazebo to look like glass, then you should choose a monolithic polycarbonate. Also, this material allows you to create canopies of various and unique shapes.

A convenient and practical canopy over a round pool without any special design can also be made of cellular polycarbonate. Its feature is the presence of several layers interconnected by stiffeners. Their light weight will completely lighten the load on the entire structure. The cost of a honeycomb panel is lower than a monolithic one.

Design

The time has come for the most complex and time-consuming process of creating a building. At the stage of drawing up a project for a canopy over a polycarbonate pool, it is necessary:

• calculate in detail how much material will be required for construction;
• calculate a convenient height and width;
• determine the depth of the foundation that can be built on the site, depending on the soil;
• determine which structure will be delivered, stationary or sliding.

Required Tools

For construction you will need:

Tools:

Materials:

Foundation

For stability and security at the very first stage, you need to prepare the foundation. The durability of the structure largely depends on its reliability, since any subsidence entails the appearance of cracks, which contributes to the rapid destruction of the canopy.

The foundation for the ground canopy above the pool should only take the load from the metal pipes and the polycarbonate used, without any additional load. If the foundation of the canopy is located close to the base of the walls of the house, it is necessary to separate their bases with an interval of 4-7 centimeters.

As a rule, such a structure is installed on a concrete base with a depth of 50-70 centimeters, but this depends on the bearing capacity of the soil in a particular area.

It is very important that in any case the foundation should stand on the mainland non-subsiding soil, but for a heavy canopy (mostly retractable), the depth of the foundation trench should be made below the point where the soil freezes through.

The foundation for a canopy over the pool with your own hands made of polycarbonate is mainly erected from concrete or bricks. In order to do this:

• the bottom of the trench is leveled;
• crushed stone is compacted dry;
• the trench is poured with a solution of cement;
• if the base is made of stone or brick, the masonry is laid in even rows, taking into account the gaps in the seams. Usually a row is laid outside with a mortar under a spatula, inner surface perform backfilling;
• several layers of cement mortar are applied to the upper area of ​​\u200b\u200bthe base and well leveled, this will require a building level;

The laying of any foundation should be completed below the level of the finished floor by 160 millimeters, approximately two rows of brickwork. At the same time, waterproofing can be laid using two layers of roofing material or by choosing a special material that has such properties.

After the work has been completed, the foundation should be tiled around the perimeter. This way of decoration will protect it from moisture and strengthen the foundation for the future canopy.

In most cases, such an element is made of wood or metal. For greater strength and durability of the frame, it is best to choose metal.

Before sheathing the frame with polycarbonate, we recommend treating it with an anti-corrosion agent.

After we made the frame of the future canopy for the pool with our own hands, it's time to start covering it.

• At the beginning of work, the coating sheet should be marked in the places where it is attached to the pipes. In the future, these marks will need to drill holes for fasteners. They should be made larger than the diameter of the screws, because. in the sun, polycarbonate can expand.
• We cover the finished structure with our coating. It is best to fix the sheets with self-tapping screws, but you need to remember the main rule: always put washers under the caps to completely close the hole.
• Joints and fasteners should be treated with sealant.

Canopy Maintenance

Despite the fact that polycarbonate is considered a practical and wear-resistant material, its hygienic appearance must be monitored.

In order for the canopy to serve for a long time, owners are advised to treat the frame with an anti-corrosion agent twice a year and, if necessary, use detergents from the development of the fungus.

Calculation of the price of cellular polycarbonate

Conclusion

A fixed or retractable polycarbonate pool canopy is a simple design that will pleasantly transform your site. Having understood and selected the necessary project, tools and materials, you can do all the work yourself, without resorting to the help of professionals.

tvoidvor.com

Do-it-yourself pool canopy

Nowadays, many can afford to have a pool in the courtyard of a private house or cottage. But it should be noted that building a pond in your yard is one thing, but caring for it is another. You need to install filters, constantly clean and remove debris that accumulates on the surface of the water and at the bottom. To simplify the task for the owner, you can make a canopy over the pool, which will protect it from pollution. You can buy them ready-made, or you can make your own, saving a decent amount on this. So, this article will look at what types of canopies are, what they serve for and how to make them. Let's look at all these questions in detail.

What is the canopy over the pool for?

Debris protection is far from the only purpose this design serves. It is multifunctional and allows you to solve many problems.

Having built a canopy or pavilion for the pool, you can get the following "bonuses":

• Water will evaporate less, which will reduce water supply costs.
• The ability to significantly reduce heat loss, and, accordingly, the funds that will be needed for heating water. Moreover, the duration of the swimming season will increase significantly.
• It will not get precipitation, debris, dust and leaves that the wind can cause. This will allow the owner to save on water filtration and chemical cleaning (only if the canopy is of the pavilion type).
• The ultraviolet, which will affect both the pool and the people bathing in it, will already arrive in a refracted form, as it will collide with an obstacle. Thanks to this, its effect on the bottom and walls will no longer be so destructive, which will help preserve your tank and the materials from which it is made. And what is important, people will also be saved from its harmful influence.
• It can be used even when it is raining or strong wind is blowing.
• In winter, the temperature inside the pavilion is slightly higher than outside, so the pool will not be tested by very low temperatures. This ensures that the entire system and materials do not become unusable too quickly.

As you can see, by spending a little money on such a simple shelter, you can save a lot of money, preserve the health of yourself and your loved ones, and extend the service life.

What should be the roof

So that the canopy over the pool is not built in vain and fully fulfills all its tasks for which it was erected, some requirements must be observed during the construction of such a building. First you need to determine for what purposes it will be intended. After all, the choice of the material itself, as well as the strategy and technology of the work depends on this. One thing is for sure - the future roof has a design familiar to us and will practically not differ from other similar ones.

The following are the main requirements that must be observed when choosing and installing a structure:

1. Reliability and structural strength. It is clear that such a building will be subject to various external factors, since it will stand all year round. The coating must be strong enough to withstand both gusts of strong winds and the thickness of snow that will settle on the roof. In this regard, the frame for the canopy must be rigid and reinforced.
2. Moisture resistance. This is an important requirement, since we are talking about a place with high humidity, where water directly hits the frame. This suggests that stationary structures based on a wooden frame are not at all suitable, since their service life will be short. The most optimal option for the construction of the frame would be a painted profile pipe.
3. If we talk about the pavilion, then an important requirement is its tightness. Dust, insects, rain and melt water must never get into the pool. For this purpose, you need to use a material that will not get wet, it must be solid or with sealed joints. It is inappropriate to use polyethylene or fabric in our case. Ideally, corrugated board or polycarbonate will cope with this task.
4. Ease of use. It is important that the future canopy meets your needs and performs the main tasks.

Depending on the size and other features of the pool, there are several types of structures installed above the tank, which are intended for various purposes. Among them:

• a stationary visor that resembles a roof for an ordinary gazebo;
• removable canopy, the frame of which is equipped with a rigid, durable covering material that can be removed and installed manually, depending on the need;
• telescopic or retractable design, which is easy to remove and put in place. It is built only when there is room for a rollback;
• pavilion that completely covers the pool. It visually resembles a greenhouse. This design completely protects from external factors.

Based on these design features, structures can be divided into the following types:

• closed;
• open;
• low;
• high.

In addition, they all differ in shape. Some are made rectangular or round, others are trapezoidal, others are cylindrical or asymmetrical. It all depends on what you expect from your shed, how big your pool is, and how big the deck is.

Planning and preparation for construction

The first thing to do if you want to build such a shelter: the type, shape, height, design and purpose of the building - all this must be thought out in advance. For small pools, a stationary canopy is suitable, which will cover it in bad weather and protect swimmers from the scorching sun. If the size is large, and the area allows you to place a pavilion, then you can build it. It all depends on your choice and needs.

It is advisable to design the future canopy, indicating the dimensions and all the features in order to navigate during construction. This can be done both on paper by drawing a detailed diagram, and by creating a project using a construction program on a computer. Then you can calculate the approximate consumption of materials. If you don't know much about it, look for detailed plans on the world wide web and choose the one that suits you best.

Now it's time to bring to life everything that is written on paper. For example, we will look at how to build a stationary pool shed. To do this, you will need the following tools and materials:

• material that will serve as a coating;
• profile pipe with a square or rectangular section;
• concrete mortar;
• bolts and screws;
• shovel;
• sand and gravel;
• rope and stakes;
• welding machine;
• concrete mixer;
• roulette and level;
• perforator;
• screwdriver;
• hacksaw for metal and electric jigsaw;
• ceramic tile.

It is better to use polycarbonate sheets as a coating material. It is becoming more and more popular and is often used to make swimming pool covers. And this is no accident, since it has a number of such advantages:

1. Light weight and strength.
2. Ease of maintenance and durability of the material.
3. Corrosion resistance, to various weather conditions.
4. Fire safety.
5. Ability to skip sunlight, scattering it.
6. democratic value.

When you have prepared the material and everything necessary tools, you can begin work on the construction of your polycarbonate cover.

Canopy base

Despite the fact that polycarbonate is a fairly light material, the whole structure will have a decent weight. Therefore, it is better to install such a canopy on a solid concrete foundation, the laying depth of which is 50 cm, and the thickness is 20 cm. A frame will be installed on such a blind area. Then you can tile the edges to make everything more attractive and protect the base from moisture.

You will need a shovel, tape measure, level, rope and pegs. First, mark the area with pegs and rope. Stick to exact measurements. Along the perimeter, focusing on the markings, you need to dig a trench 60 cm deep. Watch for the evenness of the bottom of the trench and walls. After that, fill the bottom with sand with a layer of 5-10 cm, tamp it down and again pour a layer of crushed stone and sand 5-10 cm. Make a formwork that is a multiple of one or two ceramic tiles (depending on their size) blind area. Now mix the concrete mortar and pour the foundation. It remains only to wait until the concrete gains strength, namely 1 month.

Another version of the foundation is when the supporting pillars are simply dug into the ground, then there is no need to make a foundation. This type is suitable in this case, when the soil is quite dense. It is necessary to deepen the pillars by at least 60 cm.

Frame manufacturing

After that, it's time to make a frame, which will eventually be sheathed with polycarbonate. It will be made from a profile pipe, which must be treated with an anti-corrosion agent before use. The roof can be made flat or arched. In this case, the profile should be cut in three places, bent and welded with a welding machine. If you are not confident in your abilities, it is better to entrust such work to a professional.

1. First you need to install support pillars in increments of about 1 m. They either go deep into the ground or are attached to the foundation with anchor bolts. The top is tied.
2. Now you need to weld or bolt transverse profiles, flat or arched, to the strapping and mount stiffeners between them.

Which design you will have depends on your choice. Its size and design is chosen by you personally. It is important to adhere to exact dimensions and check the evenness of your design.

Sheathing frame with polycarbonate

The last, final stage in the construction of a canopy is its sheathing. To complete it, you need:

1. Mark the polycarbonate sheets, making notes where it will connect to the frame itself. In those places you need to drill holes for self-tapping screws. Do not remove the film from the material yet, so as not to damage it. The hole for the screw should be slightly larger than the screw itself. This is because polycarbonate can expand when exposed to heat, if you make a hole the same diameter as the self-tapping screw, the material can crack when expanded in the sun.
2. Now you need to sheathe the frame (roof) with sheets butt-to-butt. Using a screwdriver, connect the sheets with self-tapping screws. Be sure to substitute galvanized washers under their hats that will close the holes.
3. Treat the joints of the sheets and the attachment points with silicone sealant.

Now your pool and you are protected from the effects of rain and sun. But what if you need to cover your tank completely to keep out debris, wind and it is protected from all sides? We need to make a pavilion. The manufacturing principle is similar. The only difference is that more material is needed, since the frame must be fully sheathed. It can be of any height and shape, depending on your desire.

Everyone can build such a canopy, the main thing is to show imagination, make a detailed drawing, purchase material and follow the recommendations for construction. To summarize, the whole work can be divided into the following stages:

1. Design selection and plan preparation.
2. Procurement of materials and tools.
3. Foundation preparation.
4. Frame construction.
5. Sheathing the frame with the material of your choice.

Video

How to install a sliding structure, see below:

The appearance of your own pool in your summer cottage can be compared with the materialization of thoughts after watching Hollywood films. If you think about it, such an element of the landscape can radically change the appearance of the territory, making it visually brighter. In this article, we will consider what a pool in a polycarbonate country house is, and also learn how to make its bowl.

It should be recognized that although our country is rich in various types of water bodies, not everyone and not always can treat themselves to swimming in them. Therefore, if "the mountain does not go to Mohammed ...", then you can turn your own site into a kind of lake shore.

A polycarbonate pool is one of the easiest ways to achieve this. At the same time, it should be understood that we are talking not only about the bowl, but also about sheltering the structure from atmospheric influences.

Why do we need a pavilion

Thanks to this design, you can really improve the performance of the pool.

She is:

• protect the summer pond from debris, in particular, branches and leaves from trees in the area, which will reduce the number of cleanings;
• will make it possible to use it even in rainy or very windy weather. Often a heater is placed in the room, warming the bathers even in the cold season;
• allows you to extend the life of an artificial reservoir, keeping it from the summer heat and saving it during conservation in the winter;
• will not let the water cool down quickly, which will give great savings in electricity;
• protect against ultraviolet radiation during water procedures;
• will become another place protected from prying eyes to relax.

Tip: if it is not possible to make a stationary pool, find out on our website how to install an inflatable one.

Pros of polycarbonate

Of course, you can make a bowl from different materials and the industry is ready to contribute to this. However, many experts are inclined to believe that polycarbonate is the most successful option.

Below we consider its positive characteristics:

1. Weather resistant.
2. Resistant to biological influences, it is noticed that algae and harmful microorganisms do not grow in such structures.
3. The price of arranging the pool depends on the size of the structure and will not exceed $10,000 excluding the pavilion. For example, a concrete bowl will cost $85 per sq. m, and from propylene - for $100.
4. You can do all the work yourself and in a short time.
5. The material is light and does not present difficulties for its delivery to the construction site.

Tip: to solve the problem of uninterrupted power supply to the country house, renting a diesel generator for the country house will help.

Constructions

Above the pool, you can install various structures that differ from each other in the degree of protection. There are two main areas:

Also, the structures differ in height above the pool:

Another structural feature of shelters, their ability to be:

• slidingwhen convenient operation occurs due to the fact that the sections are installed on rails. Such structures are difficult to manufacture, but are in good demand. This is due to the mobility of the structure;
• stationarywhen shelters are installed over high artificial reservoirs made of polycarbonate.

The design of the protective structure depends on the pool bowl and can be:

• rectangular;
• round;
• combined, used for non-standard bowls;
• domed - usually over a round bowl;
• arched or pitched, where there are necessarily vertical walls and an arched roof. Usually such structures are large in size, capable of accommodating a recreation area in addition to the pool, and even a small front garden.

Tip: if you don’t want to build a house on your own in a suburban area, ready-made country houses from block containers with all amenities are offered.

How to make a pool yourself

Below is the process instruction:

1. Choose a site that should not be the lowest in the territory and located no closer than 15 m from a residential building. Also, make sure that the crowns of trees do not obscure the future structure, and that there are no power poles nearby.
2. Clean it up and mark it up.

1. Dig a pit. Try to make the walls even and dense.

Tip: if the ground in the area is too soft, deepen the hole to a hard layer so that groundwater does not damage the building.

1. Make drainage, for which, not far from the pit, dig a hole deep below the pool. It is designed to drain water from an artificial reservoir. For this, prepare a drain pipe, one end of which is installed at the bottom of the wall of the structure, the other - out into the drainage tank.
2. Make a frame from dried pine wood, which must first be treated with an indelible antiseptic.
3. Treat the lower parts of the timbers approximately 500 mm with bitumen to protect them from decay and pests.
4. Dig in the corners of the pit with your own hands and along the perimeter of the prepared pillars, watching their horizontal level.
5. Backfill the bottom of the pit and tamp down with layers of gravel and sand.
6. Fill from above with a cement-sand screed 100 mm high.
7. After the mortar has hardened, tie the posts together with boards.

Tip: you can play it safe and put an awning fabric that does not let water through on the bottom before installing polycarbonate, choosing the right color.

1. Install the polycarbonate base over the entire frame area. Due to the good flexibility of the sheets, you can get the desired shape in a short time.

1. Seal the ends of the sheets with special adhesive tapes for polycarbonate.
2. Carry out decorative work around the pond by installing non-slip slabs or similar materials around the edges. Don't forget the stairs for easy access to the pool.

Conclusion

From the article, you learned what artificial reservoirs are in a polycarbonate country house, as well as what structures are used to protect them from atmospheric influences. It was also told how you can dig and yourself.

The video in this article will help you find more information on this topic.

The pool in the greenhouse is a unique solution to the problem of a short swimming season, which is especially true for areas of the middle lane. In such latitudes, summer does not last long and does not allow you to fully enjoy swimming in your own pool. An excellent way out of the situation would be the construction of a protective pavilion made of the same materials as the greenhouse structures.

Device and feasibility of construction

The pool in the greenhouse is a structure made of translucent materials with a bowl located inside. The structure can have both an open design and be equipped with doors and windows. In the first case, the shelter acts as a canopy, under which, in addition to a bowl of water, a recreation area can be placed.

Closed structures are equipped with full doors and require the installation of heating equipment. In this case, the operation of the pool can be all-season, which is a very convenient option for owners of private cottages in moderately cold winters.

If we talk about the expediency of erecting such a structure, then it is justified by several reasons.

• The protection of water from the ingress of leaves, mechanical debris and insects is due to the presence of walls and a roof, while it is technically possible to install windows and vents with mosquito nets, which solves the problem of greenhouse ventilation.
• Swimming in the pool is possible under any climatic conditions: in the summer months, the air and water are warmed up due to the concentration of natural solar heat and the greenhouse effect, and in the cold season, heaters are installed in the room.
• Thanks to the presence of the roof, bathers are effectively protected from the harmful effects of direct ultraviolet rays. This is especially convenient for families with small children and the elderly, for whom prolonged exposure to the sun is contraindicated.
• A noticeable reduction in the cost of cleaning and maintenance of the bowl.

Pros and cons

A large number of positive reviews about the equipment of pools in the greenhouse due to a number of advantages of such structures.

• Wide consumer availability of the necessary materials and the possibility of self-construction. In addition, a ready-made greenhouse can be used as a protective structure, the assembly of which is carried out according to the attached instructions and, as a rule, does not cause difficulties even for beginners.
• Neat and aesthetic appearance. The pool organically fits into the landscape of the site and harmoniously combines with real greenhouses and hotbeds. Most often they are made of the same materials, so they do not cause dissonance in perception.
• Significant reduction in water heating costs. In spring, summer and autumn, the water heats up naturally and does not require additional heating.

• The high resistance of the structure to aggressive conditions of external factors is due to the increased strength of greenhouse structures, designed for increased wind loads and resistant to negative temperatures.
• The protection of water from the development of pathogenic microorganisms is explained by the limited access to water of insects and worms, as well as the impossibility of penetration of plant pollen and organic remains.
• A significant reduction in water evaporation is due to the closeness of the room, and maintaining a comfortable humidity regime is due to the possibility of its regular ventilation.
• Low cost of consumables.

The disadvantages of the structures include a rather laborious construction process and an increase in construction costs in comparison with outdoor pools.

Varieties

Shelter pools can be made in several versions. The most budgetary is a canopy that covers the bowl on only one or two sides. Sheds also include arched structures that do not have side walls, and pitched roofs. The advantage of such structures is the simplicity of their manufacture and the absence of the need to install doors, windows and sliding systems.

In addition, the shelter can significantly exceed the size of the bowl in area, which allows you to place sun loungers, tables for drinks or hammocks near the water. The disadvantage of canopies and arches is the absence of side walls and all the inconveniences associated with this, including poor water heating and mechanical debris entering the reservoir.

More convenient and practical are closed pavilions, presented both in the form of traditional greenhouses, and made according to an individual design project. Such structures include dome-shaped pavilions installed above round pools. The advantage of the structures is their unusual appearance, thanks to which the structure can become a central element of landscape design. The disadvantages include difficulties in erection, which consist in the need to cut sheet material into segments.

An interesting option is the asymmetric pavilion. The structure is represented by a semi-arch and is limited on one side by a vertical wall. The advantage of such a structure is a fairly simple installation and the ability to place a recreation area inside.

The disadvantages include the overall volume of the structure and the inability to install in small areas.

Depending on the height of the structure, they are full-sized, allowing them to be in full growth, and low, having a height of no more than 50 cm. Low options also serve as a night or seasonal shelter. The roof of such greenhouses can be both stationary and telescopic. The latter is considered the most convenient and allows you to open the roof at the request of bathers, for example, in the absence of the sun or too high a temperature inside the greenhouse.

The bowls of greenhouse pools are also diverse: in addition to the classic square options, there are often round, rectangular, combined and non-standard curly shapes. According to the location relative to the ground level, the bowls are recessed and superficial. The first can be made of concrete and are the most durable, they are dug to any depth. The latter usually have a frame-tarpaulin design and are rarely deeper than one and a half meters.

The first step in building a pool in a greenhouse is choosing a location. The main requirement should be the absence of sprawling trees that can create long-term shading.

Soil is another important factor. The best option would be clay and heavy soils, which act as a natural waterproofing and do not allow groundwater to damage the base of the bowl. After the place is chosen, you need to decide on the shape of the structure. It should be borne in mind that non-standard figured bowls look very impressive, however, the filtration system in them requires a qualified calculation. This is due to the non-uniformity of the flow, which means that the water and reagents must be changed much more frequently than in traditionally shaped containers.

The second step should be the choice of cleaning equipment. For small home pools, two types of filtration systems are usually used: skimmer and overflow.

In the first case, water is supplied to the filters using a skimmer, after which it enters the pool again. When using an overflow system, water constantly circulates from the main tank to the storage reservoir, where it is cleaned, and again enters the main bowl. Water intake is carried out continuously and is carried out with the help of gratings located along the edges of the pool. This cleaning method is much more efficient than the previous one, but requires a lot of investment and is difficult to maintain.

The next step is to build the bowl. by the most in a simple way is the arrangement of a container made of polystyrene foam blocks. In addition to the fact that the material is lightweight and highly durable, it quickly absorbs air, is well ventilated and has high thermal insulation properties - this will allow the water to remain warm even at night.

For the construction of the bowl, XXL blocks are suitable. Each of the blocks has deep grooves with which you can fasten them with reinforcement. The blocks are easily cut with a regular hacksaw, which allows you to accurately fit all the elements to each other. In the process of forming the bowl in the blocks, it is necessary to make holes for the drain pipes and the filtration system. All pipes and filters are insulated with polyurethane foam.

Of course, such a structure requires additional care, if only because its water will be clogged with dust and various plant debris. To save him from this kind of trouble, a protective pavilion is erected over the pool.

To date pool-greenhouse is actively gaining popularity. By the way, the owners of this kind of structures have already appreciated them and left a lot of positive feedback on this.

Swimming pool-greenhouse

The simplest pool-greenhouse easy to build by hand using polycarbonate or other translucent materials for this.

As a frame a profile pipe is usually used. Its use allows you to give the structures a neat and aesthetic appearance.

This kind of building has several purposes.:

1. With the help of polycarbonate, you can arrange a comfortable recreation area next to the country pool.
2. The pool-greenhouse at their summer cottage is perfectly protected from pollution and does not require regular cleaning.
3. On sunny days, bathers in such a pool are perfectly protected from ultraviolet radiation harmful to the human body.
4. The pool-greenhouse with a polycarbonate cover can be operated under any weather conditions.
5. Significantly reduce the cost of electricity and other options for heating the reservoir.
6. The pavilion extends the life of the pool and reduces the cost of its maintenance and repair.

The structure above the pool is built at different heights. The low one usually does not exceed half a meter, and the high one covers only the bowl of the reservoir or allows the owner to equip the entire interior space around the pool.

Materials and building requirements

You can make a pavilion over the pool from sheet polycarbonate yourself, it does not take much effort and time. To this end, it is necessary to prepare the following materials and tools:

1. Polycarbonate.
2. Square or rectangular profile pipe.
3. Welding machine.
4. Shovel and concrete mixer.
5. Concrete mix.
6. Fasteners.
7. Electric jigsaw and screwdriver.

Benefits this type of shelter, like polycarbonate, has a lot. Some of the most important ones can be highlighted:

1. In the process of building a pool-greenhouse, environmentally friendly materials are used.
2. The building itself, as well as the materials from which it is made, is durable and light in weight, which does not require extra costs during transportation.
3. The design is resistant to negative manifestations of the environment.
4. Inside the polycarbonate pool-greenhouse, the volume of water evaporation is reduced, and the optimal humidity regime is maintained.
5. The aquatic environment of the pool is well protected from pathogenic microflora, in particular, from its occurrence and subsequent reproduction.
6. The structure can be built independently, without involving specialists for this purpose, but simply by preparing the necessary tools and materials.
7. Building materials are affordable.
8. Long service life exceeding 10 years.
9. Pavilion fire resistance and good light transmission.
10. The building is easy to maintain. Polycarbonate is cleaned of dirt using conventional detergents. The frame of the building (from a profile pipe) periodically requires painting to protect against rust. And a structure with a lumber frame needs to be checked from time to time for the presence of rotting and mold.

For shelter, polycarbonate with a thickness of more than 8 mm is more suitable.

Building Requirements

1. The pool bowl is protected in different ways. The canopy closes the pond on one side or several. Often a full-fledged pavilion is built - the most reliable shelter.
2. The cover is selected stationary or sliding (telescopic). The latter is quickly transformed: this is its big plus, but it is quite difficult to manufacture. This is a minus.
3. The type of bathing bowl determines the shape of the pool itself. It is rectangular, combined, and also round.

The polycarbonate pavilion itself, built over the country pool and made by hand, comes in different shapes:

1. Asymmetric. Reminds me of a semi-arc. It has a vertical wall along the building plus a vault on its opposite side. Standing vertical end walls act as a place for mounting the door. This option makes the building voluminous, capable of accommodating a recreation area.
2. Pavilion in the form of a dome. It is installed if the bowl of the reservoir has a round shape. With its independent construction, polycarbonate will have to be cut into segments. But on the other hand, the construction turns out to be spectacular and aesthetic.
3. Arched and pitched pavilions have two longitudinal vertical walls. Building them yourself is pretty easy.

Features of the installation of the structure and its strengthening

1. A greenhouse pool requires a good foundation. To do this, you need to pour a foundation of 50 cm with concrete and reinforcement, and then build a frame.
2. Before erecting the frame, you should decide on the shape of the future building.
3. The frame on the foundation is fixed with a bolted connection.
4. The arcs and stiffeners of the frame are fixed with special fasteners.
5. The frame is coated with anti-corrosion compounds, and then painted.
6. Next, the structure is sheathed with a covering material.

Possibility of year-round operation

As noted above, the pool's potential cannot be fully utilized during the short summer season. In particular, when the rains begin or autumn approaches, even sitting next to a pond will no longer work: it will not bring any pleasure.

But you can make a greenhouse for the pool in this way, that the facility is operated all year round. For this, the installation of the structure is carried out directly on the foundation. Of course, before installing the frame, it is necessary to strengthen the base so that the finished building serves its owner for as long as possible.

The polycarbonate dome of the pool will give the building the illusion of weightlessness. The room will be transparent and closed from all sides. The greenhouse effect created inside will allow you to swim in a comfortable environment in any weather.

It should be noted that only a high hermetic pavilion will allow the reservoir to be used all year round.

Dug into the ground, it will take on the heat of the soil, and the roof structure will not allow this heat to escape. But provided that the region has mild winters.

Otherwise, for this purpose, you will have to consider a separate internal heating system.

A photo

Swimming pool in a polycarbonate greenhouse: photo.

If there is no time and energy for self-construction of a greenhouse pool, ready kit for its construction, you can always order from a specialized company and use the services of its specialists.

The most expensive so far are considered German designs, which differ high quality. Chinese buildings are affordable, but they are much inferior in quality.

But Russian designs are a kind of "golden mean" in terms of price and quality. Therefore, they are often purchased by lovers of year-round swimming.

Useful video

And here are videos about greenhouses under the pool.

If you find an error, please highlight a piece of text and click Ctrl+Enter.