Basketball is unthinkable without a good and high-quality ball. So he had a spherical shape and was elastic it is worth keeping the ball inflated.

If the projectile is blown away, then the game of basketball is impossible, because there are strict requirements about making sure it's properly inflated.

How to choose a basketball

Exist established norms for balls intended for playing basketball:

• spherical shape;
• established shade of orange;
• traditional pattern of eight inserts and black seams.

Photo 1. MOLTEN BGF7X synthetic leather basketball, orange with black and beige stripes.

Average weight 567-650 g, circumference from 749 to 780 mm. Exist 4 standard sizes for playing basketball.

Classification:

• For indoor play only. Are labeled indoor.
• Universal(for use both indoors and outdoors), are marked outdoor.

Important! If the labeling requirements are not met, it is possible that quality degradation products and its rapid wear.

When buying, you need to pay attention so that the projectile does not bleed air. When selling, 95% of the balls are sold inflated if it is deflated, then it will probably happen all the time.

For production use the following materials:

• Leather.
• Leatherette.
• Rubber.

What to look for when buying

Buying rules:

• Don't buy too expensive for playing in open areas (asphalt) - they are not durable, last no more than 1 year.
• The more expensive hall ball Moreover, it is of high quality and will last longer. They are feel more comfortable in the hand and retain their shape.
• For Game different balls are needed in the hall and on the street.

Manufacturers:

• Spalding.
• wilson.
• Nike.

How to pump up the ball

The durability of basketballs depends on proper inflation. It is desirable to have specialized equipment for this: a pump with a needle, silicone grease. Silicone oil ensures the safety of the valve when the needle is inserted. Just a few drops is enough. In the absence of specialized oil, the needle can be moistened with saliva. Shake the ball before pumping so that the camera is in vertical position below the valve opening. Then pump it up.

Attention! Forbidden to use industrial lubricants not intended for balls. This will damage the valve!

If they are not available, another method can be used. This will require a regular bicycle pump, a syringe needle, insulating tape. This method is convenient in that all the items needed for this are available and easy to buy everywhere.

You need to take a needle from a syringe and grind, by rubbing against asphalt or a sharpening stone for a knife. This is done to make the tip of the needle blunt, otherwise it could damage the valve, resulting in a permanent air leak.

Best fit dropper needle- it is wider and stronger than that of a syringe. After preparing the needle, its base wrapped with 10 layers of electrical tape, for a snug fit to the pump.

Then the needle is inserted into the pump valve and pumping is performed. The time depends on the volume of the pump and the degree of pumping at the beginning of the process.

You can also download with a syringe, but this is a very difficult process, taking about two hours, depending on the volume of the syringe.

Is it possible to pump without a needle

This method is associated with the use compressor for pumping car tires. The simplicity of the method lies in the fact that the ball can be pumped up at any auto repair shop.

Advice. The possibility is not ruled out pumping. This will damage the camera.

To swap using this method, you need firmly press the section of the compressor hose to the ball valve then turn on the compressor. Then, firmly press the hose against the valve until the optimum pressure is reached. Modern compressors have nozzles for pumping balls.

Photo 2. The process of inflating a basketball using a DeFort DCC-252-Lt car compressor.

How much pressure is needed

During pumping, it is necessary to monitor the pump pressure gauge. The optimal pressure can be indicated on the ball. Average - from 0.4 to 0.9 bar.

Attention! In the absence of a manometer, the pressure can be checked in a simple way: throw an inflated ball from shoulder level, in the case of normal pressure, it should jump to the level of the belt.

After the game, it is desirable to deflate the ball a little, and do not keep it constantly in the maximum inflated state.

How to glue a basketball

To repair the camera you will need materials:

• patches;
• glue for rubber products (chambers);
• chamber surface cleaning tool ( sandpaper);
• kapron thread for suturing.

Procedure:

• Slightly undo one of the seams.
• Remove camera, through the ripped seam.
• Locate the puncture site, clean, then apply glue and impose a payment.
• refurbished put the camera back, sew up the seams.

To repair the seams, a strong nylon thread is needed. The seam is applied through the old holes, new ones do not need to be done.

In the section on the question How to inflate soccer ball without a needle if there is a pump? given by the author Kejam the best answer is mouth

Answer from Eurovision[expert]
Look for a replacement needle!

Answer from Request[guru]
I don't think it's possible without a needle.

Answer from Ѐustam Akhmetzyanov[guru]
You can use a medical needle, I pumped it up like that.
you wrap the plastic end of the needle with electrical tape until it fits perfectly in the slot of the pump hoses, and then you poke the sharp end of the needle into the hole of the ball and shake it.

Answer from adaptability[guru]
go to the store and buy a normal pump with a needle

Answer from Alexander Savchenko[active]
There is such a simple device as a pen. We first unwind and pull out the ampoule, then we attach the larger diameter to the pump hose, and the smaller one to the hole into which the needle is usually inserted, and we begin to pump. Depending on the type of pump, it is sometimes extremely inconvenient to inflate the ball alone using this method.

Answer from AMAZAN[newbie]
not an option

Answer from Anna Ivanova[newbie]
fail

Answer from Ѝlina Barieva[newbie]
Even the lack of a pump should not stop you. The main thing is to have a needle or something similar at hand (pick up an empty pen shaft of a similar diameter). The point is small: you need a strong plastic bag. Make sure that there are no holes in it, make a hole in the bottom and fix a needle or rod in it with tape, as shown in the diagram. Now fill the bag with air and tie the neck tightly. Gently squeezing the bag in your arms, you can distill the air from it into your sports equipment.

The durability of the product depends on the correct pumping of the ball. If you have a ball lying around that has not been used for a long time, it's time to put it on alert with possible improvised means.

In order to avoid a recurrence of such a situation, it is recommended to purchase sports equipment for the future. As a rule, the kit includes a pump, needle, silicone grease. Today we will talk about how to pump up the ball without a needle in "Spartan" conditions.

Consider important aspects order and give practical recommendations.

Method number 1. Syringe needle, bicycle pump, duct tape

1. A positive feature of this method of pumping the ball without a needle is the relative availability of materials. You can buy a syringe at any pharmacy, electrical tape - at a hardware store, a bicycle pump can be found in almost every home.
2. A negative characteristic is that the necessary pump and, especially, a syringe may not always be at hand. The guide below will help you make a ball needle so that you can later inflate the product with the resulting “tool”. So let's get started.
3. Take a needle from a syringe, sharpen it on asphalt or a curb, use a knife sharpener. It is important that the tip is blunt and not pointed, otherwise the needle will pierce the nipple, exposing the ball to spoilage. She should enter it smoothly, and not jump in in an instant.

   If possible, use a medical needle with a wide diameter (blood transfusion system), it is strong enough, does not bend or break.

4. After turning the needle, wrap electrical tape around its base so that when it enters the ball, the air does not come out back.

   As a rule, 10-12 layers are enough for the invention of a kind of adapter that will allow you to pump up the product quickly. You only need to stick the needle into the nanos, and then proceed with the procedure.

Method number 2. Compressor

The method is especially relevant if you need to pump up a soccer or volleyball while on the road.

1. The advantage of the method is that in almost every locality you will find a car service. The guys will help pump up the ball for a nominal fee or they won't take a penny from you. At the same time, they can find a needle of the right size, which is good news. The method is suitable if you have absolutely no tool for pumping the ball.
2. The downside of the method is the possible incompetence of car service workers who, through negligence, can pump the product. Such an oversight will lead to an explosion and damage to the ball, but it's still worth the risk.
3. Many car services inflate tires, gas stations also provide similar services, and completely free of charge. With the help of a powerful compressor, the air flow comes out under pressure, that's what you need.
4. Bring the hose with the nozzle to the surface of the deflated ball, press firmly and turn on the device at maximum power. Pump the product until it is hard enough. If possible, carry out the procedure together: the first person turns on / off the compressor, the second holds the ball and presses the cord, controlling the degree of inflation. It will not be superfluous to know that many modern compressors are equipped with a special nozzle for pumping balls.

Method number 3. Syringe

1. The technology of inflating the ball in this way is rightfully considered exhausting. The method is alternative to the first option, but to implement it in reality, you only need a syringe (preferably a large one) with a needle and 2 hours of free time. The duration of pumping depends on the volume of the syringe with which the procedure will be performed.
2. Perhaps, this method has no positive features. Unless, ultimately, with patience, you will be able to pump up the ball. The negative feature is the fact that the method is very tedious, long and unprofitable.

   You run the risk of ruining the nipple, as a result of which the ball will constantly deflate (if you do not use silicone grease).

3. The essence of inflation in this way is that air is introduced into the cavity of the ball using a conventional large-volume medical syringe.

   If the syringe is for 20 cubes, you will inflate the product in 30-40 minutes, in the case of ten-cube tools, it will take about 60-120 minutes.

4. To properly perform the procedure, lubricate the nipple with silicone oil or any other alternative.

   Draw air into the syringe, insert the needle into the appropriate hole, press the lever. Remove the tool, repeat the steps until the ball is inflated to the desired state. If desired, you can pre-grind the needle so that its free edge becomes dull.

How to pump up a ball with a needle without a pump

If you found a needle or made it yourself, and there was no pump at hand, this method just for you.

1. First you need to make an adapter. An ordinary plastic soda bottle acts as a homemade pump. If desired, you can replace the container with a very dense plastic bag without holes.
2. Screw the needle into the cork of the bottle or solder it with the appropriate tool. As you can see, you have an adapter, now screw on the lid, check if air is coming out.
3. Lubricate the nipple with silicone-based oil, insert a homemade unit. In a convenient way (with your hands or feet), squeeze the air out of the cavity of the container so that it passes into the ball. Pull out the needle, inflate the bottle, repeat the previous manipulations until the desired effect is obtained.

There are not many ways to inflate a ball without a needle, but this does not mean that the idea is a failure. Use a medical syringe, electrical tape and a bicycle pump. Ask to pump up the product in a car service using a compressor, build a nozzle on a bottle.

Video: how to pump up a soccer ball if there is no needle

Source: http://healthjw.com/kak-nakachat-p338.html

How to inflate a ball

Screw the pump tip into the hole on the ball and start pumping air. Insert the pump into the hole in the ball and start inflating the ball with air. It is best to use a pump.

By the way, most modern car pumps have heaps of nozzles, with their help you can pump up a ball, there is such a needle. If you want to inflate an already inflated ball, then you will need a spoon or a dull knife to pull the plug out of the nipple.

Place the deflated ball between the box and the wall and locate the ball nipple. You will also need a ball or bike pump with a cone tip.

Some models of gymnastic balls do not have a safety valve that can be closed and opened at any time. In order to inflate such a projectile, you will need a pump with a needle.

Insert the needle into the nipple and start the inflation process in the usual way. Remove the pump from the ball and quickly insert the plug. The needle must first be blunted: it should not pierce the nipple, but smoothly enter it.

Needles from blood transfusion systems are ideal: they are quite thick and durable.

Attention!

If trouble overtook you on the road, then with some effort and a little ingenuity, you can pump up the ball with a simple bicycle pump, electrical tape and needles from a syringe.

Even the lack of a pump should not stop you. Advantages: Another "medical" way, but this time it does not require a needle or a pump. You should be very careful to monitor the density so as not to pump and explode the ball. The procedure is best done by three people: two press the ball, one - on a signal, must turn off the compressor.

No need to try to inflate the ball to the diameter indicated in the instructions: 85-95% will be enough for comfortable and productive activities. If you inflate the ball too much ( over size indicated by the manufacturer on the packaging), then it will be difficult for you to keep your balance on it.

Most likely, it will not work to pump the ball up to the desired density, but the pleasure of the process is guaranteed!

Source: http://lemuriania.ru/kak-nadut-myachik/

How to pump up a ball without a needle in artisanal conditions

How to pump up a ball without a needle in artisanal conditions

Playing football in the yard or in nature is a young thing: even if you are over 50, regularly playing sports, you will feel like you are in your 20s.

But what to do if the ball taken with you is blown away, and the question arises, how to pump up the ball without a needle and a pump in artisanal conditions (beach, nature, someone else's yard)? Naturally, it would be better to take care of this, and take a bicycle pump and a needle with you (the cost of which is no more than 150 rubles).

But, if the above equipment is not at hand, all is not lost! But remember that the methods listed below are far from the safest for your ball: you can simply pump it over and ruin it, so if we are talking about a rarity autographed by your favorite football player, then it is better to postpone such manipulations.

How to pump up a ball without a needle: "Medical" way

Advantages: low cost of the method, availability of materials. Everything can be found in the roadside pharmacy and the glove compartment of the car.

Disadvantages: in the outback, there may not be such a pharmacy. In addition, the instructions below are not an answer to the question of how to pump up a ball without a needle: this is an instruction on how to make such a needle.

The essence of the method

If trouble overtook you on the road, then with some effort and a little ingenuity, you can pump up the ball with a simple bicycle pump, electrical tape and a needle from a syringe. The needle must first be blunted: it should not pierce the nipple, but smoothly enter it.

Needles from blood transfusion systems are ideal: they are quite thick and durable. The tip of the needle should be blunted on asphalt or a knife sharpener. The result should be a needle with a blunt end, which will serve as the basis for the adapter from the pump to the ball. Next, carefully wrap the tape around the base of the needle.

It will take about 12 layers. This is done so that the needle fits snugly into the pump hole.

Road way: how to pump up a ball without a needle using ... a car service

Cons: in right moment car service may not be nearby. An inexperienced worker can pump the ball, from which it can burst from excessive pressure during careless pumping or during the game.

The essence of the method

It is known that in car services the most popular service is tire inflation. The compressor used for this can supply air at high pressure, which is what we need.

The deflated ball should be pressed very tightly against the nozzle of the compressor and inflated until the desired level of rigidity is reached. You should be very careful to monitor the density so as not to pump and explode the ball.

The procedure is best done by three people: two press the ball, one - on a signal, must turn off the compressor. By the way, for many modern models compressors have a nozzle for inflating balls.

Making injections with air: how to pump up a ball without a needle: an alternative but very debilitating way

Advantages: Another "medical" way, but this time it does not require a needle or a pump. Only a first-aid kit with a syringe and a few hours of time should be at hand, depending on the volume of the syringe found.

Disadvantages: the method is exhausting and inconvenient. It is possible to permanently ruin the nipple of the ball, and it will bleed air if special oil is not used.

For those who didn't have either duct tape at hand or a car service on the way, there is another way to save the tournament by beach volleyball or street football. The bottom line is to introduce air into the ball through a simple syringe.

Depending on the volume of the syringe, the amount of work to be done depends: a 20-cc ball can be pumped up in about half an hour. 10 Ml - per hour. 5, 2 Ml - is the game worth the candle? This is the most affordable and artisanal way to pump up basketball without a needle, without having a compressor at hand.

To facilitate the introduction of the syringe and the safety of the ball, the nipple should be moistened with oil.

If there is a needle but no pump

Advantages: Quite a fun and creative way to pump. Most likely, it will not work to pump the ball up to the desired density, but the pleasure of the process is guaranteed! In addition, the method is suitable for soft beach balls.

Disadvantages: the need to find a strong plastic bag or bottle. The need to make an adapter.

There are those who do not know how to inflate a soccer ball without a needle. But the lack of a needle is, as it becomes clear, this is a third of the trouble.

The worst is for those who, for some reason, cannot use the pump, since it is still possible to create high air pressure from improvised means, but it is very difficult to direct it to a certain point (ball).

As a compressor, you can use a plastic bottle or a tight bag. Some folk craftsmen manage to solder a needle into the bottle cap and pump up the ball over and over again, standing or carefully jumping on this bottle.

After the air from the bottle passes into the ball, the structure is taken out, another portion of air is injected into the bottle and the manipulation is repeated. And so - to the bitter end!

There is a more advanced way using vinegar and soda: vinegar and soda are poured into the same bottle, and carbon dioxide is injected into the ball. But this is provided that the needle is firmly soldered into the bottle cap.

As we can see, there are a lot of ways to pump up a ball without a needle. None of them is distinguished by convenience and ease, but a true athlete is one who, despite all the obstacles, goes to the bitter end!

Source: http://fix-builder.ru/remont/raznoe-o-remonte/47365-kak-sdelat-nasos-dlya-myacha

How to pump up the ball and what is needed so that the glasses do not sweat?

Dust covers of books tend to fray at the spines quite quickly. Enough to save them inside glue strips of thick paper.

We offer to paint the rib and strip on a cardboard frame with a slide. With the help of color labels, it is easy to divide the photo library by topic, and when displaying it, avoid inverted and mirror images.

If you don’t have a special needle for pumping up a nipple volleyball or soccer ball, use ... an ordinary pharmacy pipette with an extended nose.

Cut off its rubber part a little and put it on the pump hose, and insert the glass part into the nipple hole of the ball. The ball is pumped up with such a “needle” much faster.

For pumping nipple balls, a bicycle pump with a special needle is often used. But it does not matter if it is broken or it is simply not at hand; an ordinary bicycle nipple with the rubber tube removed, installed with its threaded shank in the pump outlet, will quite cope with this work.

To quickly replenish the aquarium with water and not wash out the soil, immerse the pan filled with water into the aquarium until the levels in both containers match. Then carefully turn the pan upside down and remove it from the aquarium.

Spectacle lenses should be wiped with a soft cloth (flannel), and optical lenses - with a cotton swab moistened with alcohol.

Glasses can be cleaned well by wiping them on both sides with a cotton swab with a drop of glycerin, and then with a dry, clean flannel.

To keep glasses from fogging, they can be smeared with a mixture of 3 parts by weight of glycerin, 7 parts by weight of liquid soap and a few drops of turpentine, and then wiped with a clean flannel.

Source: http://interesu.tk/index.php/home/2012-10-18-08-56-47/14-2012-11-16-11-51-35/110-2012-11-16- 11-50-47

TOGU: ABS® gymnastic ball inflation rules

You can inflate gymnastic balls using any pump (manual or foot), or a compressor. If you decide to use a compressor, use the adapter that comes with the kit. For a harmonica foot pump, you will also most likely have to choose the appropriate adapter - such pumps, in general, have a set of different adapters.

The secret of the ABS® system lies in the structure of the patented CRYLON® material, which has additional sealing layers. Thanks to this reinforcement, at the moment the ball is punctured, the hole grows much more slowly.

Inflating rules to make sure the ABS® system works:

The ball must be kept at least 20°C(68°F) for 2-3 hours before inflating.

Inflate the ball gradually until it reaches 80% of its maximum volume. Inflation should be done at room temperature or at a maximum air temperature of 25°C(77°F). Keep in mind that the ball can be very hard at this stage. Leave it like this for at least 2 hours.

Slowly inflate the ball to your optimal size (at room temperature). Never pump the ball more than its maximum volume. Attention: Even if you inflate slowly, the ball feels hard.

This is due to the properties of the material, which has a certain resemblance to leather to the touch. The ball will reach its optimum elasticity (softness) after a maximum of 2 days.

Since the ABS® leather-like material takes longer to adapt to stretch than a regular, non-reinforced ball, it can break during inflation if not used properly.

After the final inflation phase, the ABS® ball should be left for 24 hours before being used. This is necessary so that the “anti-burst” ABS® system adapts to the environment (optimal room temperature).

After 24 hours, check the diameter of the ball, as it may have increased as a result of temperature fluctuations in the room and expansion of the air inside the ball.

If the diameter has increased beyond the norm, simply release the necessary amount of air to get the ball to the correct size.

Source: http://novasports.com.ua/ru/info/nakachuvannia-myacha-z-abs

How to pump up a gym ball

To pump up a gymnastic ball, you will need, first of all, a special pump, which, as a rule, comes with the purchased equipment. If your case is an exception, purchase it separately, their price is not so high.

In any case, you can always find an alternative, using the usual bicycle pump, which many people from Soviet Union. It is also worth taking into account that without an appropriate needle, with just a pump, it will be impossible to pump up the ball.

If you bought the ball, and did not rent it or from friends for a while, it is recommended that you read the instructions. It is in the ball box. Most likely, you need to remove all contents from the package.

Please note that it makes no sense to immediately inflate the ball to the maximum mark, so you can ruin it.

The process of filling the balloon with air must begin with the assembly of the pump: attach a small air hose to the pump, then insert a special needle. After connecting the pump and gymnastic ball start pumping it up with air. Try not to inflate the balloon, focus on incomplete inflation (~80-85%).

Now leave the ball alone, after 30-40 minutes, inflate it further to the desired state. Pay attention to the diameter of the inflated ball.

Each model has its own limit, which is indicated on the packaging or in the instruction manual. Try not to go beyond these limits.

Attention!

Why is this done at all? This procedure, divided into two steps, is necessary, first of all, for the user of this ball. The first step is to make sure the ball doesn't burst under you.

Keep in mind that an inflation procedure carried out near open flames, heaters or sources of danger can lead to irreversible consequences. Take care of yourself and your loved ones.

Almost every ball - football, volleyball, children's, basketball, gymnastics - is suitable for use only when it is properly inflated with air. Therefore, a special pump, a needle, and sometimes even silicone grease are often sold with it. But imagine that all this is simply not at hand. How to pump up a ball without a needle? We have selected for you several effective folk methods.

Method number 1: compressor

How to pump up a ball without a needle? Contact any of the car services in your locality - workers will help you for free or for a nominal amount. Do not ignore tire shops: there will definitely be powerful compressors for pumping car tires. One thing: there is a risk of pumping the product with air, which will lead to its damage or even explosion.

Compressor - equipment from which air is released under pressure. Therefore, this is a perfect answer to the question: "How to inflate a ball without a needle and a pump?" If possible, it is recommended to carry out the procedure together: one person will turn the compressor on and off, and the second person will hold the ball and press the cord, controlling the process of air intake. The hose with the nozzle is pressed tightly against the valve, after which the device turns on at full power. It must be deactivated immediately as soon as the surface of the ball becomes hard. That's all!

We also draw your attention to the fact that many models of car compressors have special nozzles for pumping balls with air.

Method number 2: electrical tape, syringe needle, bicycle pump

The tools here are among the most affordable: there is a bicycle pump in almost every home, you can easily buy electrical tape in a manufactured goods store, a hypermarket, and a syringe in a pharmacy. How to pump up a ball without a needle in this way? As easy as pie:

1. Take a needle from a syringe - the first step is to grind its sharp tip on asphalt, brick, stone, curb or with a special knife. Too sharp, it will easily pierce the nipple, which will make the ball unusable. The best would be a needle for blood transfusion systems - it is thick, durable, does not bend.
2. In the second stage, you make a kind of adapter from electrical tape - 10-12 layers of it are enough. They need to be wound tightly so that the air does not come out when pumping back.
3. How to pump up a ball without a needle? Attach the invention to a bicycle pump and proceed with the procedure.

Method number 3: syringe

How to pump up a ball without a needle - volleyball, basketball, football? Use a large medical syringe! This is in the most extreme case, because the method is quite exhausting - you will spend about 2 hours on the procedure.

As with the second method, you will need to blunt the needle or you will damage the nipple and the ball will deflate all the time. Which syringe to choose? The bigger, the better:

• It’s really possible to pump up the ball with 20-cubic meters in 30-40 minutes.
• A ten cc syringe will have you poring over the ball from an hour to two.

Before starting the procedure, we recommend that you treat the nipple with silicone grease - this will protect it from damage by an imperfect needle from a syringe. It is simple to act: insert the needle into the hole, pressing the lever of the syringe, release the air. Then remove the tool, return the lever to starting position and repeat the procedure.

Method number 4: there is a needle, but no pump

We figured out how to pump up a ball without a needle (basketball, volleyball, football, etc.) But what if you have one (or you made the needle yourself), but there is no pump? We offer the following instructions:

1. The pump will be replaced by an ordinary plastic bottle from a carbonated drink. As a last resort - a dense plastic bag without holes.
2. Now you need to screw the needle into the cork of the container or solder it. This will be the switch. Check that it does not let air through.
3. Then you need to lubricate the nipple of the ball with silicone grease.
4. But now you need to pump air with your hands (or, if it’s convenient for you, with your feet) into our homemade pump, from where it will enter the ball through the needle.

other methods

Here are some more tips for you:

• If you have not found a medical syringe, then its needle can be replaced with an empty rod from a regular ballpoint pen.
• If you managed to only slightly pump up the ball, then you can restore its hardness and elasticity like this: just hold it for a while in hot water. From this, the air inside the product will heat up, which will expand, which will complement the effect of jumping.
• Silicone grease for processing the nipple can be replaced with machine oil.
• Needle to cork plastic bottle for a homemade pump, you can attach it with a glue gun.
• Instead of a compressor, a bicycle pump, a bag or a bottle, you can also use an ordinary rubber medical bulb.
• A compressed air tank, car spare tire, or trash bag can also act as a pump.

So we sorted out all the available ways to pump any ball with an air valve, if there was no pump and a special needle nearby. Contact a car repair shop, wield a medical syringe, build your own tool - choose what is most suitable for you.

Instruction

In order to avoid unnecessary problems with inflating the ball, it is recommended to check it more carefully when buying. Serviceable good ball should also be elastic. Otherwise, there is a risk of a defective ball.

Quality test - throw it to a height of about 180 cm. If the rebound height corresponds to 120-140 cm, then the ball can be bought. It is even easier to do the same from head height, while the rebound should reach the height of the belt.

It will be useful to check the nipple. The owners do this usually by applying saliva to it. There will be no air bubbles on a working nipple. In order not to get a ball with a surface defect, you need to throw it up and look at its rebound. If the ball bounces in different directions after being hit, the ball is defective.

To inflate the ball, use a car pump, which should include a plastic nozzle designed to blow dust out of hard-to-reach places. By attaching the plastic tip to the nipple, you can start inflating the ball.

If the ball is not, you should not kick it and sit on it, as it will lose its original shape. If a needle is used for pumping, then first apply a couple of drops of special oil to the opening of the nipple, and then insert the needle there.

The ball is inflated to the value indicated next to the nipple. The oil in this case protects the valve and the walls of the nipple from possible damage by the needle, gives it elasticity and protects it from drying out. If there is no oil on hand, you can use saliva.

When pumping, it is forbidden to use lubricants that are not intended for this, as they can lead to the destruction of the nipple. The needle itself should have a perfectly flat surface. In order not to pump the ball, it is recommended to control its internal pressure with a pressure gauge.

Learn to hit ball quite simple - we all know how to do it from childhood. But how to hit ball so that it flies in a certain direction? Someone writes entire scientific treatises about this, someone shoots educational television films, and someone tries to calculate the trajectory of the ball using probability theory. In fact, it all depends on training, the more of them, the more accurate the blows are.

Instruction

Hits on ball two types: or from the summer. To improve the impact from the ground, i.e. along the motionless ball, you need to keep balance, and also remember the correct setting of the supporting leg and the position of the kicker. The height of the kick depends on the position of the supporting leg: if it is on the same line with the ball, the kick will come out with a low flight path, but if the leg is behind the ball, the ball will fly high. In order for the impact force to be maximum, it is necessary to monitor the position of the knee of the kicking leg. If at the moment before touching the ball the knee is above the ball or on the same line with it, the impact force will be maximum. After the impact, it is desirable to continue moving towards the target, and not stop. When the body deviates back, the trajectory of the ball increases, when tilted forward, the blow becomes stronger, but the ball flies lower. When hitting ball while in the air, balance and all of the above leg positions are also important. However, in this case it is also important to calculate the distance to the ball. In no case should a volley be thrown if the ball is too far or too close, as in these cases the hit will be blurry.

Strikes are also divided according to the methods of application, i.e. according to which part of the foot strikes. So a toe strike is usually applied to a stationary ball in its lower sector, in this case the angle of departure of the ball will be 40-50 degrees. To properly deliver this run-up shot, the player accelerates as they approach ball the supporting leg is placed behind and slightly to the side of the ball, and the kicker strikes with a swing motion. The body is tilted forward. When delivering this blow, the correct work of the hands is important: the hand opposite to the supporting leg is sharply backward in front, while the other is brought forward to chest level. At the moment of impact, the hands change places.

A kick with the inside of the foot usually just passes the ball. Ideally, the ball should fly and not or roll on the ground. When hitting, the toe of the supporting foot is directed in the direction where you send the ball, the kicking leg is bent at the knee, and the hit itself falls on the central part of the ball.

On impact outside foot, the toe of the skating leg should be turned approximately 30 degrees towards the target. And the blow is applied in the same way as the inside one, with the difference only in the plane of the foot in contact with the ball.

On the one hand, the lifting blow is the most difficult, and on the other hand, the main blow. Due to the contact of a large area of ​​\u200b\u200bthe foot with the ball, this stroke achieves greater accuracy. If such a blow is struck on an immovable ball, its flight path will be low. The supporting leg should be on the same straight line with the ball a little to the side of it and all the weight of the body should fall on this particular leg. The body is tilted so that the player's shoulders are above the ball. The kicking leg is bent at the knee and laid back, the ankle is relaxed. It is important to keep the angle formed by the thigh and lower leg as long as possible. The climb is tight. At the moment of impact, the knee of the kicking leg is above the ball. The arm, the same name as the supporting leg, is located behind, and at the moment of impact it passes forward and bends at the chest. The kicking leg, immediately after the kick, moves forward with the ball for some time. Lift kicks are divided into two types: a straight lift kick, when the ball touches the lift in the middle, i.e. lace-up cleats, and kick the outer or inside lifting when the ball falls on either side of the lacing.

Flying strikes ball technically they are no different in lifting. However, if the ball is in the air, it is necessary to accurately calculate the moment of swing and touch. In this case, it is not necessary to put a lot of force into the blow, since an accurate touch will give ball enough energy.

Helpful advice

In any case, to achieve perfect accuracy and the desired impact force is possible only with the help of training.

In ball play, it is important to achieve maximum control over it, since the point of the game is precisely to make the ball fly exactly where you direct it. How to hit correctly is an important topic for every player.

Instruction

If the ball rolls on the ground or is motionless, then the setting of the supporting leg and the trajectory of the kicking leg relative to the ball also matter. To control the height of the kick or pass, you need to control the position of the supporting leg in relation to ball. By placing the supporting foot on the same line with it, you can swipe with low ball trajectory. And putting your foot behind the ball, you can have a higher trajectory. The position of the upper body also matters - if you lean back, the ball will fly higher, and if you move forward, the blow will be lower and stronger. In order for the impact force to be maximum, the knee of the kicking leg at the moment it touches the ball should be on the same line with it or a little further, above the ball. After the impact, you must continue to move in the direction of the target.

To hit with the inside of the foot, the supporting leg should be placed about 10 from the ball and on the same line with it. The toe of the foot of the supporting leg should be directed towards the target, and the ankle of the kicking leg at the moment of impact should be turned perpendicular to the supporting leg. The blow must be carried to the central (height) part of the ball. After the impact, you need to continue moving in the direction of the target. At good hit The ball must fly straight, without rolling on the ground or jumping.

To strike with the outer side of the foot, the supporting leg should be placed not reaching the ball, and the toe should be turned 15-30 degrees away from the direction of impact. This will allow you to apply precise blow.

To kick with a lift, the supporting leg must be on the same line with the ball, the toe of the foot is directed towards the target. The toes and ankle of the kicking leg at the moment of impact must be tense and fixed, the body is tilted forward so that the shoulders are above the ball. To fly at low altitude, you need to hit the ball or a little higher, hit inner surface toe.

To strike with the inside of the foot with a twist, the supporting leg must be placed next to the ball. Her fingers should be directed either towards the target, or at a slight angle away from it. The kicking leg swings and touches the ball top thumb. The blow should be applied just below the ball (in height) and on its outside to add torsion. After such a blow, you must continue to move, but not in the direction of the target.

To hit with the outside of the foot with a twist, the supporting leg should be placed to the left of the ball (for the right-hander), its fingers are directed at the target or slightly turned away from the target in the direction of the twist. The kicking foot must touch right side ball with the outside of the foot. After hitting, you must continue to move in the direction of the ball's flight.

To kick with a toe, the supporting foot must be placed behind the ball, fingers towards the target. With such a blow, the swing of the kicking leg is done quickly, with a slight movement of the hip, the toes of the kicking leg are raised and tense. You have to strike at lower part ball to give it backspin and a high flight path.

To hit on ball in the air, it is important to adjust to the trajectory of its flight - you need to be at the right distance from the ball. Moving in short steps, you need to accurately catch the moment to strike. Attention should be focused on the timing between the swing and the touch - if the moment of the touch is timed correctly, this will give enough power and accuracy to the strike. If the flying ball is already too close or vice versa, you do not reach it - it follows from a volley. The technique of the kick itself is similar to the lift kick.

Working off necessary equipment hitting takes a lot of practice. Beginners should hit the immovable ball, and more advanced - to practice hitting the rolling one. You also need to train different dribbling options before hitting - the willingness to strike out of the situation dramatically increases their effectiveness.

Football is a simple game at first glance. It seems that the players just dribble and hit it, trying to get into the opponent's goal. In fact, they need to own a large number skills. Kicking the ball is one of them.

Instruction

Place the ball on the 11 meter kick in front of the . Your task is to make an accurate shot, hitting the net. Take three big steps back from the ball. Take one step to the side. If you are right handed, then move to the left. The left-hander, respectively, departs to the right.

Approach the ball by taking the first step kicking leg. On the third step, the non-strike leg should be about 15 cm from the ball. Point your toes in the direction you want to launch the projectile. Keep both knees bent and arms wide apart to create balance. Repeat this and the previous step until these steps become automatic.

Bring your kicking leg smoothly forward and hit the center of the ball with the inside edge of your foot. Make sure your knee is directly over the ball when you kick it. Swing your foot over the ball so that at the end of the kick it points to the target of the ball. Attach your ankle to the kick itself as well to add more power to it. You should get a cannon shot that will pierce through the mesh if you did everything right.